General
Number of RJ45 ports	24 piece
Number of SFP+ ports	4 piece
PoE technology	PoE++ -
Maximum PoE power per port	60 W
Total PoE budget	600 W
Data rate RJ45 ports (22x)	2,5 GbE
Data rate RJ45 ports (2x)	10 GbE
Switching power	230 Gbit/s
Non-blocking throughput	115 Gbit/s
Call forwarding tariff	171,12 Mpps
Current supply	internal, AC/DC 660 W
Supported voltage range	100–240 V AC
Max. power consumption (without PoE)	56 W
Operation temperature	-5 to 40 °C
Operating humidity	10 to 90 % non-condensing
Housing material	SGCC steel -
Rack format	1U -
Indication	1.3-inch touchscreen -
Certifications	CE, FCC, IC -
Management interface	Ethernet In-Band -
Layer 3 functions	DHCP server, DHCP relay, inter-VLAN routing, static routing -
Etherlighting™ technology	Yes -
RPS support	Yes -
Application requirements	UniFi Network version 8.6.9 and higher -
LED indicators	System Status, RPS Status -
Button	Factory reset -

The Ubiquiti UniFi Switch USW-Pro-HD-24-PoE is a professional, fully managed Layer 3 switch designed for use in demanding network infrastructures. It features 24 PoE++ ports, of which 22 RJ45 ports support data rates up to 2.5 GbE and two RJ45 ports enable up to 10 GbE. Additionally, four 10G SFP+ ports are integrated, suitable for fast uplink connections. The PoE++ technology provides a maximum power output of 60 W per port, with a total PoE budget of 600 W available. This enables the power supply of numerous network devices such as IP cameras, access points, or telephone systems directly via the network cable, simplifying installation and increasing flexibility.

Etherlighting™-Technology is a central feature of this switch. The ports illuminate in various colors to indicate location, speed/connection, and native VLAN/network. This visual feedback significantly simplifies network diagnostics and maintenance. The brightness of the indicators can be optimized by using UniFi Etherlighting patch cables, improving visibility and orientation within the network.

Functions and equipment in detail include a comprehensive range of Layer 2 and Layer 3 functions. Layer 2 functions include IGMP Snooping, STP/RSTP with priorities and port-based deactivation, port isolation, storm control, Voice VLAN, port mirroring, LACP port aggregation, multicast/broadcast rate limiting, MAC address blocking, flow control, 802.1X control, jumbo frames, proprietary loop protection, DHCP Snooping/Guarding, egress rate limiting, LLDP-MED, MAC-based port restriction, and device isolation with ACLs. The QoS function Pro AV supports prioritization of audio and video traffic. On the Layer 3 level, functions such as DHCP server for locally managed networks, DHCP relay, inter-VLAN routing, static routing between local networks, and network isolation with ACLs are available.

Technology explained simply shows that the switch features an internal AC/DC power supply with a power rating of 660 W. Operation is via a universal input with a voltage range of 100–240 V AC at 50/60 Hz. The maximum power consumption is 56 W (without PoE output). The PoE technology supports various modes: PoE (44–57 V, max. 15.4 W), PoE+ (50–57 V, max. 30 W), and PoE++ (max. 60 W). The switching capacity is 230 Gbit/s, the non-blocking throughput is 115 Gbit/s, and the forwarding rate is 171.12 Mpps. Management is performed via an Ethernet In-Band interface.

Compatibility and accessories include the use of UniFi Etherlighting patch cables, which optimize the port illumination function. Integration into existing networks requires the use of UniFi Network Software version 8.6.9 or later. The switch is prepared for use with a UniFi RPS (Redundant Power Supply) for DC backup power, thereby achieving increased network availability.

Mounting and installation is carried out in a 1U rack enclosure made of SGCC steel, enabling space-saving integration into standard 19-inch racks. Dimensions are 442.4 x 400 x 44 mm. The device features a 1.3-inch touchscreen and a factory reset button. The operating environment requires a temperature range of -5 to 40 °C and humidity of 10 to 90 %, non-condensing. Certifications CE, FCC, and IC confirm compliance with applicable standards.

Operational advantages lie in high network performance, easy maintenance through Etherlighting technology, and comprehensive functionality for Layer 2 and Layer 3. The integrated PoE++ technology reduces the need for external power supplies and simplifies the installation of network devices. Support for inter-VLAN routing and static routing enables flexible network architecture. Management via UniFi Network Software provides centralized control and monitoring of network equipment.

The display of system and RPS status LEDs supports quick identification of operating states. The combination of high PoE budget, high speed, and extended functionality makes the USW-Pro-HD-24-PoE a powerful solution for professional networks.