| General |
| Number of RJ45 ports | 24 |
| PoE+ ports | 16 |
| PoE++ ports | 8 |
| PoE++ power per port | 60 W |
| Total PoE power | 400 W |
| SFP+ ports | 2 |
| SFP+-data rate | 10 Gbit/s |
| Throughput (non-blocking) | 44 Gbit/s |
| Switching power | 88 Gbit/s |
| Forwarding rate | 65,472 Mpps |
| Operating voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Current supply | internal, AC/DC |
| Power supply capacity | 450 W |
| Max. power consumption (without PoE) | 50 W |
| PoE voltage range (PoE) | 44–57 V |
| PoE voltage range (PoE+) | 50–57 V |
| ESD/EMP protection (air) | ±16 kV |
| ESD/EMP protection (contact) | ±12 kV |
| Operation temperature | -5 to 40 °C |
| Operating humidity | 10 to 90 % |
| Housing material | SGCC steel |
| Rack width | 19 " |
| Touchscreen size | 1,3 inch |
| Certifications | CE, FCC, IC |
| USP RPS DC input | 52 V DC, 7,69 A / 11,5 V DC, 2,61 A |
| Degree of protection | not specified |
The Ubiquiti UniFi Switch USW-Pro-24-POE is a fully managed, rack-mountable Layer-3 switch designed for use in enterprise networks and professional IT infrastructures. It features 24 Gigabit Ethernet ports, of which 16 are
PoE+ (802.3at) and 8 are
PoE++ (802.3bt), with the PoE++ ports providing a maximum power output of 60 W per port. The total PoE power capacity is 400 W, enabling the power supply of numerous PoE-enabled end devices such as IP cameras, access points, or telephone systems. Two
10G SFP+-Ports serve as uplink or aggregation connections and support data rates up to 10 Gbit/s. The switch is designed for use in 48,3 cm ( 19 inch )-racks and features an integrated
1.3-inch touchscreen display, enabling direct access to basic settings and status information. Cooling is nearly silent, making it suitable for environments with high acoustic requirements.
Applications
The switch is designed for use in medium to large networks, particularly in environments where central management of network devices and decentralized power supply over the network are required. It is suitable for office buildings, schools, hotels, or industrial facilities where many PoE-enabled end devices are connected. Support for Layer-3 functions enables the creation of complex network structures with routing, VLANs, and QoS settings. The prerequisite for using Layer-3 functions is the use of UniFi Network Software version 5.10.5 or later.
Functions and Equipment in Detail
The switch offers a
non-blocking throughput of 44 Gbit/s and a switching capacity of 88 Gbit/s, ensuring high data processing speed. The forwarding rate is 65,472 Mpps. The PoE ports are equipped with automatic detection for PoE, PoE+, and PoE++, ensuring compatibility with various end devices. PoE technology enables power delivery over the network cable (Ethernet), eliminating the need for separate power supplies for end devices. The PoE voltage ranges are 44–57 V for PoE and 50–57 V for PoE+ and PoE++. Power supply is provided by an internal AC/DC power supply unit with a capacity of 450 W, supporting a universal input range of 100–240 V AC at 50/60 Hz. Additionally, the switch is prepared for direct current backup power (USP RPS) via DC inputs (52 V DC, 7.69 A or 11.5 V DC, 2.61 A), enabling continuous network availability even during power outages.
Technology Explained Simply
The display shows status information such as system status, network connections, PoE status, and SFP+ link activity. The
ESD/EMP protection function provides protection against electrostatic discharges (air: ±16 kV, contact: ±12 kV), increasing the reliability of the device in environments with high electromagnetic influences. The operating temperature ranges from -5 °C to 40 °C, and the operating humidity is between 10 % and 90 % (non-condensing), enabling installation in indoor environments under normal ambient conditions. The enclosure construction is made of SGCC steel, ensuring a robust and long-lasting design.
Compatibility and Accessories
The switch is compatible with various accessory components that extend network functionality. These include SFP+ module transceivers such as module ALL4758 (10 Gbit/s, singlemode, up to 20 km) or module ALL4757 (10 Gbit/s, multimode), which can be used for uplink connections over fiber optic cables. SFP modules such as ALL4750 (1 Gbit/s, multimode) or ALL4751 (1 Gbit/s, singlemode, 10 km) are also compatible. An RJ45-SFP transceiver module (UACC-CM-RJ45-1G) enables the use of SFP ports for RJ45 connections. For monitoring and maintenance of PoE networks, a TP(RJ45) POE tester (e.g. Synergy 21, S215281) is suitable. Using an Ubiquiti Unifi SmartPower Redundant Power System (USP-RPS-EU) enables continuous monitoring and power supply for up to six connected devices.
Mounting and Installation
The switch is designed for mounting in 48,3 cm ( 19 inch )-racks and can be installed using the included mounting brackets. Dimensions are 442.4 mm (W) × 285.4 mm (H) × 43.7 mm (D). The device weighs 4.3 kg without mounting brackets and 4.4 kg with mounting brackets. Installation is performed via the integrated management interface (Ethernet In-Band), with configuration done through the UniFi Network Software. LED indicators for system status, Ethernet connection, PoE status, speed/link/activity, SFP+ link/activity, and RPS status support visual monitoring of the device.
Operational Advantages
The switch offers high network performance with a total throughput of 44 Gbit/s and a switching capacity of 88 Gbit/s. The integrated PoE technology reduces the number of required power supplies and simplifies the installation of end devices. Nearly silent cooling ensures a quiet operating environment. Support for Layer-3 functions enables flexible network architecture. The integrated LCM display and compatibility with the UniFi Network Management System simplify network management and monitoring. Preparation for direct current backup power increases network availability in critical situations.