General
Degree of protection	IP20
Maximum data rate	10 Gbit/s
Wavelength	1590 nm
Compatibility	SFP+, SFP
Connection	Duplex-LC-UPC
Transmission range	20 km
Fibre type	Single mode
Technology	CWDM

The UBIQUITI NETWORKS SFP+-transceiver with manufacturer number UACC-OM-SFP10-1590 is an optical module for CWDM (Coarse Wavelength Division Multiplexing) and is designed for data transmission in 10-Gigabit-Ethernet networks over single-mode fibre optic cable. The module enables connections with a maximum reach of 20 km and is specifically designed for use in industrial and professional network infrastructures where high bandwidth and stable connections over long distances are required.

Applications
This module is designed for use in networks requiring high data rates and reliable fibre optic transmission. It is typically used in switches, routers, or other network devices equipped with SFP+- or SFP-interfaces. The use of CWDM technology allows multiple wavelengths to be used on a single fibre optic cable, thereby increasing the capacity of existing infrastructure. This is particularly advantageous in environments such as corporate networks, data centres, or for connecting locations over long distances.

Features and Specifications in Detail
The transceiver supports a maximum data rate of 10 Gbit/s and is therefore suitable for operation in 10/1 GbE networks. It features a duplex LC-UPC connector, ensuring a secure and precise connection to the fibre optic cable. The UPC end-face (Ultra Physical Contact) minimises reflections and ensures stable signal transmission. The module operates in pairs with a second transceiver using the same wavelength to enable bidirectional communication over a single fibre optic cable.

Technology Explained Simply
The module uses CWDM technology, in which multiple optical signals with different wavelengths are transmitted over a single fibre optic cable. The UACC-OM-SFP10-1590 operates at a wavelength of 1590 nm, which lies within the CWDM range and is optimised for transmission over single-mode fibre optic cable. The maximum reach of 20 km is achieved under standardised conditions, with actual reach depending on cable quality, connections, and signal strength. The use of single-mode fibre optic cable enables high bandwidth and minimal signal loss over long distances.

Compatibility and Accessories
The module is compatible with SFP+- and SFP-interfaces, enabling use in a wide range of network devices. It is specifically designed for use in systems supporting 10-Gigabit-Ethernet. Combining it with a second module of the same wavelength is necessary to establish a bidirectional connection.

Installation and Mounting
Installation is performed by inserting the module into the corresponding SFP+- or SFP-slot interface of the network device. The mechanical latch ensures secure fixation. After installation, the connection is made via the fibre optic cable. Configuration is carried out through the network device itself, with no special settings required on the module. Adaptation to network settings occurs automatically via the interface.

Operational Advantages
Using the UACC-OM-SFP10-1590 provides a cost-effective way to increase the capacity of existing fibre optic infrastructure without laying additional cables. The high data rate of 10 Gbit/s ensures smooth transmission even with large data volumes. Compatibility with SFP+- and SFP-interfaces increases flexibility in device selection. The stable signal transmission over 20 km makes the module suitable for applications requiring high reach and reliability.