General
Maximum data rate	10 Gbit/s
Wavelength	1550 nm
Transmission range	20 km
Fibre type	Single mode
Connection	Duplex-LC-UPC
Compatibility	SFP+ and SFP interfaces
Technology	CWDM

The UBIQUITI NETWORKS SFP+-transceiver with manufacturer number UACC-OM-SFP10-1550 is an optical module for CWDM (Coarse Wavelength Division Multiplexing) and is designed for data transmission over single-mode fibre optic cable. The device is designed for 10G connections and supports a maximum data rate of 10 Gbit/s. It is specifically designed for use in networks requiring high bandwidth and stable, long-lasting connections over long distances.

Applications
This module is used in professional network infrastructures, particularly in environments where multiple optical connections are routed over a single fibre optic cable to optimise bandwidth and reduce cable count. CWDM technology enables the use of multiple wavelengths on a single fibre, thereby increasing the cable's capacity. The transceiver is designed for connections up to 20 km over single-mode fibre optic cable, making it suitable for applications in telecommunications, enterprise networks, or industrial environments.

Features and Equipment in Detail
The transceiver features a duplex LC-UPC connector, ensuring a secure and precise connection with fibre optic cables. The UPC optics (Ultra Physical Contact) ensure low reflection loss and high signal quality. The module is compatible with SFP+- and SFP-interfaces, enabling flexible integration into existing network devices. It is used in pairs with a second transceiver operating at the same wavelength to enable bidirectional communication over a single fibre optic cable.

Technology Explained Simply
CWDM technology uses different wavelengths to transmit multiple data streams simultaneously over a single fibre optic cable. The UACC-OM-SFP10-1550 operates at a wavelength of 1550 nm, which is standard in single-mode optics and enables high reach. Data transmission occurs over the network cable, with the module converting electrical signals into optical signals and vice versa. The maximum reach of 20 km is achieved under standard conditions, with the actual distance depending on the quality of the fibre optic cable and the number of connections.

Compatibility and Accessories
The module is designed for devices supporting SFP+- or SFP-ports. It can be used in switches, routers, or other network devices offering these interfaces. Connection is made via a single-mode fibre optic cable with duplex LC-UPC connectors. It is important that the cable meets the required quality and length to achieve maximum reach.

Installation and Mounting
Installation involves inserting the module into the corresponding SFP+- or SFP-port of the network device. Connection to the fibre optic cable is made via the duplex LC-UPC connector. Correct alignment and a clean connection are critical for a stable link. The devices into which the module is installed must provide the required power supply and network control.

Operational Advantages
The use of the UACC-OM-SFP10-1550 enables efficient use of fibre optic cables, as multiple connections can be routed over a single cable. This reduces the number of cables required and simplifies cabling. The high data rate of 10 Gbit/s ensures fast and reliable data transmission, even over long distances. Compatibility with SFP+- and SFP-interfaces increases flexibility when integrating into existing infrastructures.