UBIQUITI NETWORKS UACC-AOC-SFP10-20M, EAN: 0810010077172

UBIQUITI UACC-AOC-SFP10-20M AOC 10 Gbps 20 m

Networks > Switches > Modules

UBIQUITI UACC-AOC-SFP10-20M AOC 10 Gbps 20 m

Lieske Part No. 2123209
Mfg Part No UACC-AOC-SFP10-20M
EAN-Code 0810010077172
Manufacturer UBIQUITI NETWORKS
Here only 56,43 EUR
67,15 EUR incl. VAT

Further information for UBIQUITI UACC-AOC-SFP10-20M AOC 10 Gbps 20 m

General
Connector typeSFP+ to SFP+
Cable length20 m
Maximum throughput rate10 Gbit/s
Supported data rates10/1 Gbit/s
Cable jacketPVC
Jacket OD3,0 mm
Wavelength850 nm
Jacket colourAqua
Operation temperature0 to 70 °C
The product is an SFP+ direct-attach cable from UBIQUITI NETWORKS, type UACC-AOC-SFP10-20M, specifically designed for use in network infrastructures requiring high data rates. It serves as an active optical cable (AOC) for connecting SFP+ ports, for example between switches, servers, or other network devices, enabling data transmission at a maximum speed of 10 Gbit/s. The cable length is 20 meters, making it suitable for medium to large connections within data centers or network room configurations. The cable is designed for indoor use and also supports data rates of 1 Gbit/s, allowing flexible integration into existing networks.

Applications

The cable is primarily intended for use in professional networks, particularly in environments where high bandwidth and a stable, cable-based connection are required. Typical use cases include connecting network switches within a data center, linking servers to switches, or expanding LAN infrastructures. Due to its 20-meter cable length, it is especially suitable for connections over medium distances where the use of fiber optic cables or other active cables is not necessary. The support for 10/1 Gbit/s enables adaptation to existing networks that are not fully upgraded to 10-Gigabit technology.

Functions and Features in Detail

The cable features an SFP+ connector type at both ends, enabling direct connection between compatible SFP+ ports. The connection is established via active optical technology, in which electrical signals are converted into optical signals for transmission over the cable. The wavelength is 850 nm, typical for multimode optics and suitable for indoor environments. The jacket color is aqua, which is commonly used in the industry to indicate 10-Gigabit connections. The cable is equipped with a PVC cable jacket, providing sufficient mechanical stability and protection against external influences.

Technology Explained Simply

An active optical cable (AOC) such as the UACC-AOC-SFP10-20M combines the advantages of optical transmission with the simplicity of a direct cable connection. Unlike purely electrical cables, which suffer from length limitations at high data rates, optical technology enables stable transmission over 20 meters at 10 Gbit/s. The integrated electronic modules at both ends convert electrical signals into light signals and vice versa, maintaining signal quality over the entire length. The use of multimode optics with an 850 nm wavelength is optimized for indoor connections, offering sufficient reach at a lower cost compared to single-mode optics.

Compatibility and Accessories

The cable is designed for SFP+ ports, which are found in many modern network switches, servers, and other devices from UBIQUITI NETWORKS as well as compatible third-party manufacturers. It is part of the UniFi product family and can be used in systems that rely on SFP+ connectors. The compatibility with 10/1 Gbit/s enables flexible use in networks with varying speed levels.

Installation and Mounting

Installation is performed by simply plugging the SFP+ connectors into the corresponding ports of the network devices. No additional configuration or software extension is required, as the connection functions physically and electronically directly. The 20-meter cable length requires careful planning of cabling to avoid cable tangles or strain. The cable is designed for an operating temperature range of 0 to 70 °C, making it suitable for use in typical indoor environments such as server rooms or network room configurations.

Operational Advantages

The cable provides a reliable, high-speed connection without requiring additional transceivers or external power supply. The direct connection between SFP+ ports reduces the number of required components and minimizes potential failure points. Optical technology ensures low signal distortion and high stability, especially over longer connections. The support for 10/1 Gbit/s enables flexible integration into existing networks without requiring a complete reconfiguration. The aqua-colored jacket facilitates visual identification in the network room.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2123209
qrcode für UBIQUITI UACC-AOC-SFP10-20M AOC 10 Gbps 20 m