HF data carrier, data carrier is intended for direct mounting on/in metal, the installation position of the data carrier (arrow) as well as the spatial arrangement to the read/write head must be observed in order to achieve a maximum read/write distance, if the data carrier is installed flush (1mm set back in metal), the read/write distance is reduced by approx. 30%, extended storage temperature range: the data carriers must be subjected to a sufficient suitability test in the form of stress tests in the respective temperature processes provided before use., the following stress test was carried out on this data carrier:¿Cyclic temperature load: 5 min. at 20 °C - 5 min. at 160 °C¿Transition time 30s, number of cycles tested: 100¿This successfully conducted test does not imply suitability for a specific high-temperature application, but merely serves as proof of basic usability., EEPROM, memory size 146 bytes, suitable for direct mounting in metal