Inductive sensor, for use in vehicle electrical systems, operating voltage 8.6.65 VDC, rated switching distance 15 mm, flush, threaded barrel, M30 x 1.5, stainless steel, 1.4301, for vehicle electrical systems, 12V and 24V, increased interference immunity 100V/m blasted according to ISO 11452-4 and 100mA BCI according to ISO 11452-2, load dump protection according to DIN ISO 7637-2 (SAE J 113-11), extended temperature range, high protection class IP68 / IP69K, protection against salt spray and rapid temperature changes, permanently legible nameplate through laser engraving, DC 3-wire, 8.4...65 VDC, normally open, PNP output, connector, M12 x 1, E1 type approval by the Federal Motor Transport Authority