| Features |
| PCI Express configurations | 1x16,2x8,1x8+2x4 |
| Maximum number of PCI Express lanes | 16 |
| Graphics & IMC lithography | 22 nm |
| PCI Express slots version | 3.0 |
| Bandwidth | 5 MB/s |
| Embedded options available | No |
| Execute Disable Bit | Yes |
| Thermal solution specification | PCG 2013D |
| Scalability | 1S |
| Thermal Monitoring Technologies | Yes |
| Processor code | SR1R5 |
| Supported instruction sets | AVX 2.0,SSE4.1,SSE4.2 |
| CPU configuration (max) | 1 |
| Processor package size | 37.5 mm |
| Idle States | Yes |
| Thermal Design Power (TDP) | 80 W |
| Memory |
| Memory channels supported by processor | Dual |
| ECC supported by processor | Yes |
| Maximum internal memory supported by processor | 32 GB |
| Memory clock speeds supported by processor | 1333,1600 MHz |
| Memory types supported by processor | DDR3-SDRAM |
| Memory bandwidth supported by processor (max) | 25.6 GB/s |
| Processor |
| Processor model | E3-1231V3 |
| Stepping | C0 |
| Processor threads | 8 |
| Processor socket | Socket H3 (LGA 1150) |
| Bus type | DMI |
| Box | No |
| Processor family | Intel Xeon E3 v3 |
| Processor boost frequency | 3.8 GHz |
| Processor cache | 8 MB |
| Component for | Server/Workstation |
| L3 cache speed | 3.4 GHz |
| Processor frequency | 3.4 GHz |
| Processor cache type | L3 |
| Processor lithography | 22 nm |
| Processor cores | 4 |
| Processor operating modes | 64-bit |
| System bus rate | 5 GT/s |
| Other features |
| Intel | VT-d,VT-x |
| Processor special features |
| Enhanced Intel SpeedStep Technology | Yes |
| Intel Virtualization Technology for Directed I/O ( | Yes |
| Intel | 2.0 |
| Intel Fast Memory Access | Yes |
| Conflict Free processor | No |
| Intel Enhanced Halt State | Yes |
| Intel Trusted Execution Technology | Yes |
| Intel TSX-NI | Yes |
| Intel Virtualization Technology (VT-x) | Yes |
| Intel VT-x with Extended Page Tables (EPT) | Yes |
| Intel Stable Image Platform Program (SIPP) | Yes |
| Intel Flex Memory Access | Yes |
| Graphics |
| On-board graphics adapter | No |
Compact LED downlight in a square design. Recessed downlight with edge for sawn ceiling openings. Tool-free ceiling installation using quick-assembly clamps. Square ceiling cut-out size 210 mm. Installation depth >= 127 mm, luminaire height 130 mm. With high-gloss vapor-coated plastic reflector. Color of the ceiling installation frame: white. Symmetrical light distribution characteristics and half-value angle: 60° Very Wide Flood. Light control using collimator/lens technology. Limitation of direct glare in accordance with UGR 19. With one LED module. Luminaire luminous flux 2,000 lm, connected load 16.5 W, luminaire luminous efficacy 121 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra = 80. Color tolerance (initial MacAdam) = 3 SDCM corresponds to a very high color uniformity of the LED in the application. Average service life L90 (tq 25 °C) = 50,000 h, average service life L80 (tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Permissible ambient temperature (ta): -20 ° C - + 25 ° C. Housing and heat sink made of die-cast aluminum. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20. Protection type on the room side: IP54. Shock resistance level according to IEC 62262: IK06, test temperature glow wire test according to IEC 60695-2-11: 850 °C. With 5-pin connection terminal up to 2.5 mm² for mains connection and separate 5-pin mains forwarding box. The mains-side connection of the ballast is made using a connection terminal. With electronic ballast, digitally dimmable (DALI). Operating device according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). Possible dimming range: 1...100%. The operating device is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Live-Link ready. The luminaire is silicone-free. The luminaire meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. The luminaire is also ENEC-certified by an independent testing center. For workplaces with display screens. Offices, corridors, foyers, conference rooms, sales areas, waiting areas. With Trilux's after-sales promise: The luminaire is available for 10 years, spare parts (LED module, control gear and optical system) for 15 years after the invoice date. Reasonable changes that serve progress are reserved.