Round LED downlight for covered outdoor areas. Recessed downlight with edge for sawn ceiling openings. Ceiling cutout Ø 131 mm, installation depth 115 mm. Installation in cast concrete ceilings using Invera C 150 BE accessories. With reflector made of anodized aluminum. With rotationally symmetrical, wide beam light distribution. Luminaire luminous flux and light color fixed. Rated luminous flux 2200 lm, rated power 24 W, maximum luminaire luminous efficacy 92 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 2 SDCM. Average rated service life L80(tq 25 °C) = 60,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Surface coated in black (RAL 9005). High resistance to UV rays and resistant to corrosion caused by salt mist. On request, the luminaire body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), White textured (Akzo Nobel 8158870, similar to RAL 9016, V6), Gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. External dimensions of ceiling ring Ø 149 mm, luminaire height 109 mm. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, shock resistance according to IEC 62262: IK07. Weight: 0.9 kg. The luminaire is suitable for operation on a 230V direct current network (DC). With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 1 kV / 2 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.