Design
Internal	Yes
Weight & dimensions
Height	22.1 mm
Weight	122 g
Width	80.3 mm
Depth	15.2 mm
Performance
TBW rating	75
Data transfer rate	6 Gbit/s
S.M.A.R.T. support	Yes
Solid-state drive capacity	250 GB
Read speed	540 MB/s
TRIM support	Yes
Mean time between failures (MTBF)	1500000 h
Write speed	500 MB/s
Sequential writing	Yes
Security algorithms	256-bit AES
Solid-state drive interface	M.2
Random read (4KB)	97000 IOPS
Random write (4KB)	89000 IOPS
Power
Operating voltage	5 V
Operational conditions
Operating temperature (T-T)	0 - 70

LED recessed light for panel ceilings module 100 for single or strip lighting applications with protection class IP54. Suitable for use in HACCP, IFS and/or BRC Global Standard Food certified companies. For panel ceilings in module 100, panel width 84 mm, joint width 16 mm. For installation in panel ceilings, an accessory that must be ordered separately is required (4401 G2 ZBP .). The translucent PMMA cover is made from one piece and is particularly stable in the corners. With Lambertian light intensity distribution. The cover is non-yellowing and does not cloud. Luminaire luminous flux and light color are fixed. Rated luminous flux 4000 lm, rated power 32 W, maximum luminous efficacy of the luminaire 125 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 60,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The replacement light source can be purchased as a spare part. Luminaire body made of sheet steel. Surface coated white (RAL 9016). Dimensions (L x W): 1550 mm x 100 mm, height 105 mm. With front-side knockout openings for through-wiring. Protection class (EN 61140): I, protection type (DIN EN 60529): IP54, shock resistance according to IEC 62262: IK05, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 4.1 kg. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.