LED floor lamp with direct and indirect luminous flux distribution, dimmable. With integrated passive infrared presence detector and daylight sensor. A switched-on lamp reduces the light output by 70% if no movement is detected within a period of 30 minutes. After a further 30 minutes without motion detection, the lamp is switched off. When activated, the daylight sensor enables a constant brightness level in the area around the lamp. The brightness reference value can be changed and saved using a button. A DIP switch enables the setting and combination of the light management operating modes (motion sensor on/off, daylight sensor on/off). Optical system consisting of a prismatic PMMA cover plate for the direct component and a clear PMMA cover for the indirect component. With symmetrically limited wide beam light intensity distribution. Glare rating according to UGR classification (EN 12464-1) 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of aluminum. Consists of luminaire head, base profile and base. Surface coated white (RAL 9016). Luminaire head and mast in rectangular design. The base is U-shaped. Dimensions of luminaire head: 835 mm x 300 mm, luminaire height: 1960 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 14.7 kg. With electronic control gear, dimmable (integrated). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Operation according to the touch dimming principle takes place via a touch sensor embedded in the luminaire mast flush with the mast surface. Direct and indirect components can be dimmed separately. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.