LED floodlight for area lighting. With SLR equipment (Smart Lighting Ready) for the subsequent integration of components for light management systems. The standardized base according to Zhaga is attached to the top of the luminaire head. The luminaire is designed for the D4I standard and Zhaga / D4I certified. The luminaire meets the requirements of EN 60598 and is designed for wind effects according to EN 1991 (Eurocode) with a base wind speed of up to 30 m/s (corresponds to wind zone 4 in Germany) in terrain category 1. Mounting bracket made of die-cast aluminum. The sturdy mounting bracket with 3 holes enables a 2-point attachment as well as a central 1-point attachment. Spotlight head can be pivoted using one-point mounting on the mounting bracket. The pivot position is secured by toothed locks. Spotlight head and mounting bracket are fully assembled when delivered. Mast mounting for single and multiple use possible using accessories. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. With asymmetrical, wide beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Luminaire luminous flux and light color are fixed, with constant luminous flux at the end of the service life (CLO). LED system consisting of 24 MLT LED modules, each with 4 LEDs. Rated luminous flux 32000 lm, rated power 244 W, maximum luminaire luminous efficacy 131 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body and cover plate carrier made of die-cast aluminum. Cover plate made of flat single-pane safety glass attached to the support frame. Luminaire body (primary color) and retaining bracket (additional color) in contrasting colors. Primary color anthracite (DB 703), additional color silver gray (RAL 9006). Luminaire housing with highly weather-resistant powder-coating. Other color variants possible according to RAL or DB color code. Dimensions (L x W): 633 mm x 494 mm, height 291.5 mm. Ball-proof in accordance with DIN 18032-3. Protection class (EN 61140): I, protection type (DIN EN 60529): IP66, shock resistance level in accordance with IEC 62262: IK09. Wind attack area fw . Weight: 15.5 kg. With electronic control gear, switchable. The operating device is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.