Bollard head unit with circular cone-shaped, opal PMMA reflector. Can be used in combination with standpipes in various designs and heights that must be ordered separately. For illuminating walkways up to 2 m wide. 2 LED modules with 4 LEDs each integrated in a lens system, direct beam. Optical system designed in multi-lens technology (MLT). With asymmetrical wide beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Luminaire luminous flux and light color fixed, with luminous flux constant at the end of the service life (CLO). Rated luminous flux 800 lm, rated power 7.5 W, maximum luminaire luminous efficacy 107 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Average rated service life L80(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Coating suitable for marine weather on request. Luminaire diameter 172 mm, luminaire height 425 mm. End cylinder made of highly impact-resistant PMMA, clear. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK04. Wind attack area fw 7,000 m2. Weight: 2.5 kg. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes in the interests of progress.