Multivariable and modern tube luminaire with a profile diameter of 75 mm. Luminaire in PMMA design suitable for use in uncovered outdoor areas due to its higher UV resistance. With limited surface temperature, suitable for use in fire-hazardous rooms in accordance with DIN EN 60598-2-24. For wall and ceiling mounting. Standard stainless steel mounting clips (2 pieces, V2A) with triangle included in delivery. Optional accessories enable further mounting concepts. For individual applications. The continuous mounting channel of the luminaire body enables very high flexibility in the placement of the fastening points. The packaging is made of recyclable cardboard, plastic-free. Multiple packaging with 28 luminaires and project packaging with 108 luminaires per packaging unit also reduce the general consumption of resources in the overall process. Opal cylinder profile with photometrically effective prism structure as secondary optics. With Lambertian luminous intensity distribution. With predominantly direct luminous intensity distribution. With a slight indirect component to brighten the surface. Luminaire luminous flux and light color are fixed. Rated luminous flux 6400 lm, rated power 49 W, maximum luminaire luminous efficacy 131 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. Gas-tight luminaire profile made of PMMA. End cap with high-quality, matt surface structure and surface quality according to VDI30 made of ASA. Color of the end caps gray (RAL 7035). End caps cannot be removed or opened. Luminaire length 1505 mm, luminaire height 81 mm, Ø luminaire body 81 mm. The device carrier is fixed to the luminaire profile with transparent devices to prevent shadows. Permissible ambient temperature (ta) -25 °C - 30 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP69K, shock resistance level according to IEC 62262: IK03, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 2.6 kg. Connection via a 3-pole cable (3000 mm) leading to the outside. With electronic control gear, switchable. ENEC certification by an independent testing center is in preparation. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE mark. In addition, the luminaire is ENEC-certified by an independent testing center. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date available subject to reasonable changes in the interest of progress.