Compact table lamp with a flat, round lamp head, three adjustment joints and base. Lamp with Active equipment for optional, automatic control of the light color. The lamp is controlled via the controls on the lamp head. Suitable for illuminating an RF3 area according to DIN 5035-8 with up to 500lx without additional lighting. In conjunction with general lighting (500lx), modified illuminance levels according to DIN EN 12464-1:2021 of up to 1000lx are achieved on the RF3 area for office-specific visual tasks. With base plate for setting up on a flat surface. The base plate is fully lined with felt to protect the base. The vertical joint on the lamp base enables the lamp head to be rotated by 120 °. With prismatic cover for optimal light distribution. With asymmetrical wide beam light intensity distribution. With HCL equipment for controlling the light color using a separate control unit (DT8). Rated luminous flux 650 lm, rated power 8.5 W, maximum luminaire luminous efficacy 90 lm/W. Light color variable (warm white - daylight white), correlated color temperature (CCT) variable (2700 K - 6300 K), general color rendering index (CRI) Ra > 90. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Surface coated white (RAL 9016). Dimensions of the base plate: Ø 190 mm x 10 mm. Dimensions of the luminaire head Ø 134 mm x 23 mm, luminaire height (continuously adjustable) 390 mm - 715 mm. Protection class (EN 61140): II, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 2.8 kg. The plug-in power supply unit (Euro connector type C, EN 50075) is equipped with a connecting cable and coupling for connection to the luminaire cable. The cable is routed completely inside the luminaire body, the connecting cable is securely connected using a plastic clamp. The connecting cable (1500 mm) on the back is connected to the connecting cable of the power supply unit (1500 mm) using a plug connection. The total cable length of the connection is 3000 mm. With electronic control gear, dimmable (integrated) The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). With integrated control unit for controlling the light color depending on the day and time of year (circadian control). Operation via 2 buttons (on/off/brightness/light color/HCL curve). The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE mark. In addition, the lamp is ENEC-certified by an independent testing center. Lamp 10 years, spare parts (LED module, operating device,optical system) 15 years after the invoice date, subject to reasonable changes in the interests of progress.