Next generation LED top-mounted and side-mounted luminaire with clear lines and an attractive silhouette. Luminaire with 3-way multi-lumen equipment. The luminous flux is adjusted using a 3-stage switch. With intelligent label for quickly calling up luminaire information using a QR code. With power reduction via control phase. Switching off a control phase causes the luminous flux of the luminaire to be set to 50%. Top-mounted and side-mounted mounting on or at a mast spigot Ø 76 mm. Tilt angle 0°...90°, adjustable in 5° increments, scaled. Can be easily and quickly adjusted from top-mounted to side-mounted luminaire using a screw accessible from the outside. Mounting on walls is possible using accessories that must be ordered separately. The mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with spigots Ø 42, 48 and 60 mm using reducers that must be ordered separately. Matching mast on request. In MLT design (multi-lens technology), consisting of highly efficient, UV and temperature-resistant lens systems in a quadruple arrangement. With asymmetrical wide beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory to be ordered separately. Luminaire luminous flux adjustable in 3 levels, with constant luminous flux at the end of the service life (CLO). LED system consisting of 6 MLT LED modules with 4 LEDs each. Rated luminous flux 3500 lm - 4600 lm, rated power 25 W - 36 W, maximum luminaire luminous efficacy 140 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Average rated service life Lclo(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The selection switch for setting the luminous flux is set to the highest luminous flux at the factory. Luminaire body made of die-cast aluminum. Pivot point made of UV and weather-resistant ASA. Luminaire body (primary color) and pivot point (additional color) in contrasting colors. Primary color anthracite (DB 703), additional color silver gray (RAL 9006). With metallic effect, highly weatherproof. The fastening elements are coated in the housing color. VG compartment cover made of die-cast aluminum, which can be opened without tools using a toggle lever lock. The E-block can be removed without tools. The replaceable cover plate made of heat-treated single-pane safety glass is securely attached to the luminaire housing with four stainless steel fastening elements. The cover is equipped with a durable, UV-resistant polyurethane seal. Coating suitable for marine weather on request. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock resistance level according to IEC 62262: IK08.Mast available on request. Wind attack area fw 0.110 m2. Weight: 6.9 kg. With connected, 8000 mm long supply cable. With electronic control gear, switchable. Control gear in accordance with DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.