Luminaire head of the modular, decorative LED light column system. Version with clear PMMA cover. With power reduction via control phase. Switching off a control phase sets the luminaire luminous flux to 50%. The column system is designed for use in areas of terrain category 1 to wind zone 4. For mounting on a compatible system standpipe. Compatible system standpipes are available as a separate unit in various lengths and alternatively with a base plate or ground piece. The steel standpipes have a diameter of 193.7 mm. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical wide beam light distribution. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Luminaire luminous flux and light color are fixed, with constant luminous flux at the end of the service life (CLO). Rated luminous flux 4600 lm, rated power 37 W, maximum luminaire luminous efficacy 124 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum Ø 193.7 mm. Color anthracite (DB 703). Coating suitable for marine weather on request. Luminaire height 1044 mm, luminaire diameter Ø 193.7 mm. Other colors and anti-graffiti coating on request. End cylinder made of PMMA, clear. Luminaire body can be rotated horizontally by 360°. No screws are visible in the connection area between the standpipe and the luminaire head. A design joint visually underlines the modularity of the light column system. Protection class (EN 61140): II, protection type (DIN EN 60529): IP65, impact resistance level according to IEC 62262: IK05. Wind attack area fw 0.190 m2. Weight: 15.0 kg. Wired ready for connection with freely hanging electrical connection cable. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) available 15 years after invoice date subject to reasonable changes in the interests of progress.