Exclusive LED floor lamp with 2 separately controllable lamp heads, direct and indirect beam. For standard-compliant illumination of opposite double workstations, especially when these are separated from each other by protective walls. In terms of design and lighting properties, the floor lamp harmonizes with hanging and surface-mounted lamps as well as other floor lamp variants in the project. The lamp is delivered in 4 packages to protect the individual components. The direct part of the lamp, with its wide, slightly asymmetrical light distribution, creates a very even illumination of the desk surface. The indirect part with Lambertian light distribution creates optimal room illumination. With symmetrically limited wide beam light distribution. Glare rating according to UGR classification (EN 12464-1) 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of extruded aluminum profile and die-cast aluminum. U-shaped luminaire base. Surface coated in silver gray (RAL 9006). Other colors available on request. Luminaire height: 2000 mm, length / width of base: 550 mm / 550 mm, length / width of luminaire head: 1080 mm x 710 mm, height of luminaire head: 23 mm. Standpipe dimensions: 80 mm x 80 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 25.2 kg. Connection via flexible connection cable 3 x 1 mm2 (protective contact plug and C14 cold device socket), length approx. 3000 mm. Alternative plug types available: connection plug type J SEV, Switzerland, connection plug type BS, British Standard 1363. The connection cable is included in the scope of delivery. With 2 electronic control devices, digitally dimmable (DALI). Control device in accordance with DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a button function via DALI control terminals (Touch DIM). The control device is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The 2-way button in the lamp stand enables separate switching and dimming of direct and indirect components. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. Luminaire 10 years, spare parts (LED module, control gear, optical system) available 15 years after invoice date subject to reasonable changes in the interests of progress.