Exclusive LED floor lamp with 2 separately controllable lamp heads, direct and indirect beam. For standard-compliant illumination of double and quadruple workstations. With integrated passive infrared presence detector and daylight sensor. The lighting is set, evaluated and controlled separately for each lamp head. The detection range of the PIR sensors of each lamp head can be individually varied using the sensor covers provided. In terms of design and lighting properties, the floor lamp harmonizes with hanging and surface-mounted lamps as well as other floor lamp variants in the project. The lamp is delivered in 4 packages to protect the individual components. Pre-assembled lamp head for quick and easy assembly in just three steps. The direct part of the lamp with its wide, slightly asymmetrical light distribution ensures very even illumination of the desk surface. The indirect part with Lambertian light distribution ensures optimal room illumination. With symmetrical, limited, wide beam light distribution. Glare rating according to UGR classification (EN 12464-1) 80. Color tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of extruded aluminum profile and die-cast aluminum. H-shaped luminaire base. Surface coated silver gray (RAL 9006). Other colors available on request. Luminaire height: 2000 mm, length / width of base: 800 mm / 450 mm, length / width of luminaire head: 1334 mm x 290 mm, height of luminaire head: 23 mm. Standpipe dimensions: 80 mm x 30 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 25.2 kg. Connection via flexible connection cable 3 x 1 mm2 (protective contact plug and cold device socket C14), length approx. 3000 mm. Alternative plug types available: connection plug type J SEV, Switzerland, connection plug type BS, British Standard 1363. The connection cable is included in the scope of delivery. With 2 electronic control gears, digitally dimmable (DALI). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The control elements (2-way buttons) are integrated into the standpipe for each lamp head. These enable the direct and indirect components of the individual lamp head to be switched and dimmed separately. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE mark. Lamp 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.