General
Degree of protection	IP66
Shock resistance rating	IK08
Protection class	II
Rated luminous flux	4200 lm
Rated power	33 W
Luminous efficacy	127 lm/W
Colour of light	warm white
Colour temperature	3000 K
CRI	>70
Colour tolerance	5 SDCM
Ambient temperature	35 °C
Dimmability	DALI
Connection cable	6000 mm
Luminous flux constancy	CLO
Flicker	Pst LM = 1.0
Optical technology	Multi-Lens Technology (MLT)
Luminaire body material	Aluminium die-cast
Surface protection	anthracite coated (similar to DB 703)
End cap	ESG-H
Transmission factor	>98 %
Pole fastening	stainless steel screws in accordance with EN 60598-2-3
Mast pin Ø	76 mm
Reducers	available separately
Accessories	rear/lateral shielding available separately
Availability of spare parts	15 years
Luminaire availability	10 years
Surge voltage withstand	6 kV / 10 kV
Wind load area	0,040 m²
Eco-design
ENEC certification

The Trilux Publisca P3-AB2L/4200-730 4G1 ETDD is a decorative side-mounted luminaire for outdoor use, specifically designed for mounting on street poles or masts. The product provides efficient and aesthetically pleasing illumination of traffic areas, sidewalks, or public squares. The luminaire features a planar cover glass and is equipped with an intelligent label that provides quick access to technical information via a QR code. The supply cable has a length of 6000 mm and is already integrated, simplifying installation. The luminaire is designed for a mast pole diameter of 76 mm and is secured using two stainless steel screws in accordance with EN 60598-2-3. The maximum light point height is 6000 mm.

Applications

The luminaire is suitable for use in urban and rural outdoor environments, particularly on streets, parking lots, pedestrian zones, or in public infrastructure. The asymmetrically wide light distribution ensures uniform and efficient illumination of the area beneath the luminaire. The horizontal orientation of the luminaire body optimizes light distribution and minimizes glare. Additional light distribution characteristics are available for specific requirements.

Functions and Equipment in Detail

The luminaire is equipped with four LED modules, each consisting of four LEDs and connected to an optical system. The light source is fixed, with the luminous flux maintained constant over the entire lifespan (CLO). The rated power is 33 W, the rated luminous flux is 4200 lm, corresponding to a maximum luminous efficacy of 127 lm/W. The light colour is warm white with a correlated colour temperature (CCT) of 3000 K. A Tunable White version (2200 K – 4000 K) is available on request. The general colour rendering index (CRI) is above 70, and the colour tolerance is 5 SDCM (initial MacAdam). The average rated lifespan (LCLO) at an ambient temperature of 35 °C is 100,000 hours. The light source is replaceable in accordance with ecodesign requirements (VO (EU) 2019/2020).

Technology Explained Simply

The optical system is based on Multi-Lens Technology (MLT), consisting of highly efficient, UV- and temperature-resistant lens systems. The cover glass is made of heat-treated single-pane safety glass (ESG-H) and is sealed into the luminaire body, achieving a transmission rate of over 98 %. The luminaire body is made of aluminium die-cast and is coated anthracite (similar to DB 703). A seawater-resistant coating is available on request. The protection rating IP66 ensures dust-tight and watertight construction, suitable for outdoor use. The impact resistance rating is IK08, indicating high mechanical durability. The permissible ambient temperature (ta) is 35 °C. The wind load area (Fw) is 0.040 m². The luminaire is equipped with a control gear that is digitally dimmable (DALI) and complies with the DALI-2 standard (EN 62386). The control gear is also replaceable in accordance with ecodesign requirements. The surge voltage resistance is 6 kV (Differential Mode) and 10 kV (Common Mode). The product meets the essential requirements of applicable EU directives and the Product Safety Act and bears the CE marking. Additionally, the luminaire is ENEC certified.

Compatibility and Accessories

A matching mast is available on request. The light source and control gear are replaceable in accordance with ecodesign requirements, extending the maintenance life and service life of the luminaire.

Installation and Mounting

Mounting is performed on a mast pole with a diameter of 76 mm using two stainless steel screws in accordance with EN 60598-2-3. The supply cable is already integrated with a length of 6.0 m. The device carrier, which contains all electrical components and LED modules, is mounted as the upper luminaire section and can be removed after loosening four V2A mounting screws. The maximum mounting height is 6000 mm.

Operational Advantages

The luminaire offers high luminous efficacy and a long lifespan of 100,000 hours at an ambient temperature of 35 °C. The luminous flux constancy (CLO) ensures consistent light quality throughout the entire lifespan. DALI control enables flexible dimming. Spare parts (LED module, control gear, optical system) are available for 15 years after the invoice date, and the luminaire itself for 10 years. The IP66 protection rating and IK08 impact resistance rating ensure a robust and weather-resistant design. Flicker-free operation (Pst LM = 1.0 at full load) provides pleasant lighting without visual strain. The ESG-H cover glass with >98 % transmission maximizes luminous efficacy. The anthracite coating (similar to DB 703) provides a modern, unobtrusive appearance.

Protection rating, operating voltage, light colour, luminous flux, lifespan, dimmability, ecodesign, and ENEC certification are the key technical features that define the functionality and quality of the luminaire. The luminaire is designed for use in public areas where reliability, energy efficiency, and ease of maintenance are required. The combination of modern design, high luminous efficacy, and long lifespan makes it a suitable solution for municipal and industrial lighting applications.