Gas-tight surface-mounted luminaire for damp rooms, covered and uncovered outdoor areas. Suitable for use in HACCP, IFS and/or BRC Global Standard Food certified companies. Luminaire in PMMA design suitable for use in uncovered outdoor areas due to its higher UV resistance. With limited surface temperature, suitable for use in fire-hazardous rooms in accordance with DIN EN 60598-2-24. For ceiling, wall and suspended mounting. Wall mounting can be horizontal or vertical. Theft-proof mounting possible using an anti-theft device that must be ordered separately. Mounting clips and triangle brackets for suspended mounting included in delivery. Mounting clips can be moved. With Lambertian light intensity distribution. Luminaire luminous flux and light color are fixed. Rated luminous flux 6000 lm, rated power 51 W, maximum luminous efficacy of luminaire 118 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The luminaire body made of a one-piece PMMA extrusion profile is resistant to chemical environmental influences. Luminaire body color light gray (RAL 7035). Dimensions (L x W): 1487 mm x 76 mm, luminaire height 67 mm. Permissible ambient temperature (ta): -20 °C - +35 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP69K, shock resistance level according to IEC 62262: IK03, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 2.3 kg. Connection via a 3-pole cable (3000 mm) leading to the outside. The light is suitable for operation on a 230V direct current network (DC). With electronic control gear, switchable. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE mark.