General
Degree of protection	IP65
Degree of protection lamp compartment	IP65
Shock resistance rating	IK10
Protection class	I
Rated luminous flux	5100 lm
Rated power	80 W
Luminous efficacy	64 lm/W
Colour of light	neutral white
Colour temperature	4000 K
Colour rendering index	Ra > 80
Colour tolerance	3 SDCM
Control	DALI
Connection cable	5 x 0,75 mm²
Connection cable length	1500 mm
Flicker-free	Pst LM = 1.0
Beam angle	64 °
Luminaire body material	Aluminium die-cast
Surface coating	anodized, epoxy powder primer, polyester powder coating
Surface protection	anthracite (similar to DB 703)
Mounting bracket	zinc-plated steel
Hinge mechanism	central joint, rotation range 330°, tilt range -45° to +90°
End cap	flat, extra clear
Luminaire head diameter	330 mm
Permissible ambient temperature	25 °C
Surge voltage withstand (Differential Mode)	1 kV
Surge voltage withstand Common Mode	2 kV
Replaceable light source

The Trilux Faciella Slim 40 AM17R/5100-840 1G1 ETDD is a round, compact LED spotlight designed for direct mounting on solid ground. It belongs to a product series that meets various lighting requirements while maintaining the same aesthetic design. The luminaire is particularly suitable for outdoor areas and is compatible with an earth spike (as accessory) for securing in the ground. The luminaire body is made of corrosion-resistant aluminium die-cast, anodized, and coated with an epoxy powder primer and an ageing-resistant polyester powder coating. The surface is coated in anthracite (similar to DB 703), with additional colour options such as black, white, or textured grey available at no extra cost upon request. Other colours according to RAL or DB colour code are available at an additional charge.

Applications
This spotlight is designed for outdoor use, particularly in areas requiring robust and weather-resistant lighting. The protection rating IP65 ensures dust-tight and water-tight enclosure, making it suitable for use in humid or rain-exposed environments. The impact resistance IK10 protects the luminaire against mechanical impacts, making it suitable for public or industrial applications. The luminaire is designed for an ambient temperature of 25 °C.

Functions and Equipment in Detail
The luminaire features a mirror reflector made of anodized aluminium, producing an asymmetric medium-wide light intensity distribution. The beam angle is 64°, enabling targeted and even light distribution. The light source is fixed with a rated luminous flux of 5100 lm at a rated power of 80 W, corresponding to a maximum luminous efficacy of 64 lm/W. The light colour is neutral white with a similar correlated colour temperature (CCT) of 4000 K. The general colour rendering index (CRI) is over 80, ensuring good colour rendering. The colour tolerance is 3 SDCM (initial MacAdam), guaranteeing high colour consistency. The average rated life is L80 at an ambient temperature of 25 °C and 50,000 hours. The light source is replaceable according to ecodesign requirements (EU Regulation (EU) 2019/2020).

Technology Explained Simply
The luminaire is equipped with an electronic ballast that is digitally dimmable (DALI control). This enables precise and flexible light control, for example, depending on daylight or usage scenarios. The supply cable is 5-pole with a cross-section of 5 x 0.75 mm² and a length of 1500 mm. The surge voltage resistance is 1 kV in differential mode and 2 kV in common mode, increasing reliability during electrical disturbances. Flicker-free operation is specified with Pst LM = 1.0 at full load, ensuring comfortable and eye-friendly lighting.

Compatibility and Accessories
The luminaire is compatible with an earth spike (as accessory), enabling secure installation in the ground. Mounting is done via steel mounting brackets with zinc plating. Precise alignment of the luminaire is achieved through a central joint, allowing horizontal rotation of 330° and tilting from -45° to +90°. The locking system ensures secure fixation of the desired position. The end cap is flat and extra-clear, optimizing light distribution.

Mounting and Installation
Mounting is done directly onto solid ground, with the mounting brackets and stainless steel screws ensuring stable anchoring. The luminaire is designed for direct installation, with the 1500 mm long supply cable allowing flexible positioning. Protection class I and protection rating IP65 (for both the luminaire and the lamp compartment) require proper installation according to electrical standards.

Operational Advantages
The luminaire offers high luminous efficacy and long service life, resulting in lower maintenance and replacement costs. The DALI control enables intelligent light regulation, allowing energy savings and optimized lighting usage. The robust construction with IK10 impact resistance and IP65 protection rating makes the luminaire suitable for demanding outdoor applications. The replaceable light source meets ecodesign requirements and supports sustainable use.

Protection rating, operating voltage, light colour, luminous efficacy, service life, control, mounting method, material, surface coating, joint mechanism are the central technical features determining the functionality and suitability of the luminaire.

Note: Batteries are not included in the delivery scope.