Round, compact LED spotlight. The luminaire is part of a series with variants that cover different lighting requirements with the same luminaire design. For direct mounting on a solid surface. With ground spike (accessory) suitable for fastening in the ground. Mirror reflector made of anodized aluminum. With asymmetrical medium-wide beam light distribution. Luminaire luminous flux and light color fixed. Rated luminous flux 2600 lm, rated power 40 W, maximum luminaire luminous efficacy 65 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Round, flat lamp body made of corrosion-resistant die-cast aluminum. Surface anodized and then provided with an epoxy powder primer and age-resistant polyester powder coating. Mounting bracket made of galvanized steel. Surface anthracite coated (DB 703). On request, the lamp body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Length 90 mm, lamp height 255 mm, width 268 mm. Lamp head Ø 230 mm. With flat cover plate, extra clear. Central joint for rotation and pivoting on two axes with locking system for precise spotlight alignment. Horizontal rotation range: 330°, pivoting range - 45° - 90°. With stainless steel housing screws. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, protection class lamp compartment: IP65. Shock resistance level according to IEC 62262: IK10. Protection class lamp compartment: IP65. Weight: 3.3 kg. With 5-pin connection cable 5 x 0.75 mm2, 1500 mm. With electronic control gear, digitally dimmable (DALI). Surge voltage resistance differential mode / common mode: 1 kV / 2 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.