Round, decorative LED wall light with one-sided light emission in protection class IP65. The wall light's optical and technical design features harmonize with other lights that can be used in the project. Can also be used in its entirety inside the building. Surface-mounted light for wall mounting. Mounting bracket made of galvanized steel. Corrosion-resistant, screws made of A4 stainless steel. Reflector made of anodized aluminum, faceted. Cover plate made of transparent glass. With rotationally symmetrical, wide beam light distribution. Light emission can be directed upwards or downwards by mounting the light accordingly. With rotationally symmetrical, wide beam light distribution. Beam angle 60°. Luminaire luminous flux and light color fixed. Rated luminous flux 1000 lm, rated power 11 W, maximum luminaire luminous efficacy 91 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. Housing made of extruded aluminum profile, end frame and wall mounting housing made of die-cast aluminum. Luminaire body anodized, primed and powder-coated. Surface anthracite coated (DB 703). On request, the luminaire body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Dimensions (L x W): 172 mm x 115 mm, lamp height 220 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK08. Weight: 1.7 kg. The lamp is suitable for operation on a 230V direct current network (DC). With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The LED system with control gear is suitable for operation on direct current networks. Surge voltage resistance differential mode / common mode: 2 kV / 1 kV. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.