General
Rated luminous flux	189 lm
Rated power	3,7 W
Luminous efficacy	51 lm/W
Colour temperature	4000 K
CRI	> 90
Colour tolerance	3 SDCM
Flicker Pst LM	1,0
Degree of protection	IP65
Shock resistance rating	IK08
Protection class	III
Connection cable	H05R-NF 2 x 1 mm²
Connection cable length	900 mm
Ambient temperature	25 °C
Luminaire height	28 mm
Surface coating	anthracite, similar to DB 703
Luminaire body	Aluminium die-cast
Cover disc	Tempered glass
Type of control gear	to be ordered separately, external
Ecodesign requirements	VO (EU) 2019/2020
Surge voltage withstand	0 kV / 0 kV

The Trilux Invego Square W1 AM16L/190-940 1G1 is a design-oriented, very flat surface- or recessed-mounted luminaire designed for coordinated lighting concepts in indoor and outdoor applications. The luminaire features a square design with dimensions 105 mm x 105 mm and a height of 28 mm. The light distribution is asymmetric and medium-wide, enabling targeted light guidance.

Applications

The luminaire is suitable for use in indoor and outdoor environments where discreet, flat, and aesthetically pleasing lighting is required. It is suitable for applications such as facade lighting, wall accents in residential or commercial buildings, and architecturally demanding installations where integration into the facade or wall surface is prioritized. The protection rating IP65 ensures protection against dust and water jets, enabling outdoor use. The impact resistance class IK08 provides high protection against mechanical impacts.

Functions and Equipment in Detail

The luminaire features a fixed luminous flux of 189 lm at a rated power of 3.7 W, corresponding to a maximum luminous efficacy of 51 lm/W. The light colour is neutral white with a correlated colour temperature (CCT) of 4000 K. The general colour rendering index (CRI) is above 90, ensuring good colour rendering. The colour tolerance is 3 SDCM (initial MacAdam), ensuring high colour consistency across the entire product range. The average rated lifespan is L80 at an ambient temperature of 25 °C and is specified as 50,000 hours. Flicker is rated as very low with Pst LM = 1.0 at full load, ensuring pleasant and disturbance-free lighting.

Technology Explained Simply

The luminaire body is made of aluminium die-cast, ensuring high mechanical stability and good heat dissipation. The cover lens is made of toughened glass, providing high impact resistance and durability. The surface is coated anthracite, similar to colour DB 703, creating a modern and unobtrusive appearance. The supply cable has a length of 900 mm and consists of cable type H05R-NF 2 x 1 mm². Protection class III means the luminaire can be operated without additional earthing, simplifying installation.

Compatibility and Accessories

For flush mounting in indoor and outdoor applications, the accessory Invego...BE concrete casting housing with mounting kit is required. The luminaire is designed for an ambient temperature of 25 °C. The surge voltage resistance is specified as 0 kV (Differential Mode / Common Mode), indicating a specific application.

Mounting and Installation

Mounting is done either by surface mounting on the wall or by recessed installation into a wall or facade opening using the optional concrete casting housing. The supply cable allows flexible wiring. The protection rating IP65 and impact resistance class IK08 ensure robust and weather-resistant installation outdoors.

Advantages in Operation

The luminaire features high luminous efficacy, long lifespan, and low flicker. The high CRI rating ensures natural colour rendering, which is particularly beneficial in living and working spaces. The flat design and modern appearance allow seamless integration into architecture. The use of a replaceable ballast supports maintenance and replacement during the product's service life.

The luminaire meets the basic requirements of applicable EU directives and the Product Safety Act and carries the CE marking.