Cubic, decorative LED ceiling light with protection class IP65. Cover plate made of hardened, satin-finished glass. Can also be used in its entirety inside buildings. Surface-mounted light for ceiling mounting. The light is attached using a mounting plate made of cast aluminum. Mirror optics made of highly efficient aluminum. With rotationally symmetrical, wide-beam light distribution. With rotationally symmetrical, wide-beam light distribution. Luminaire luminous flux and light color are fixed. Rated luminous flux 2800 lm, rated power 27 W, maximum luminaire luminous efficacy 104 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. Luminaire body made of die-cast aluminum. Luminaire body anodized, primed and powder-coated. Surface anthracite coated (DB 703). On request, the lamp body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), White textured (Akzo Nobel 8158870, similar to RAL 9016, V6), Gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Dimensions (L x W): 150 mm x 150 mm, lamp height 150 mm. On request, the luminaire body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK07. Weight: 2.8 kg. With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire is suitable for operation on a 230V direct current network (DC). Surge voltage resistance differential mode / common mode: 4 kV / 2 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.