Ball-proof LED surface-mounted luminaire with CDP cover plate, tested in accordance with DIN VDE 0710-13. Suitable for use in sports facilities in accordance with DIN 18032-3. The tests were carried out by an institute accredited in accordance with DIN EN ISO 17025 (VDE Testing and Certification Institute GmbH / ISP GmbH - Institute for Sports Facility Testing, Münster). LED modules and operating devices are combined in a sustainable assembly. This can be replaced without dismantling the luminaire body and the optical system from the ceiling structure. The assembly is available as an accessory that must be ordered separately. Surface-mounted luminaire for ceiling mounting. Can also be used as a recessed or suspended luminaire with accessories. With highly efficient CDP microprismatic. With symmetrical, wide-beam light distribution. Luminaire luminous flux and light color are fixed. Rated luminous flux 12000 lm, rated power 100 W, maximum luminaire luminous efficacy 120 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 90. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L90(tq 35 °C) = 50,000 h, average rated service life L80(tq 35 °C) = 100,000 h. Luminaire body made of sheet steel. Surface coated white (RAL 9016). Dimensions (L x W): 1548 mm x 309.5 mm, luminaire height 97 mm. With front-side knockout openings for heat-resistant through-wiring. Ball-proof in accordance with DIN 18032-3. Permissible ambient temperature (ta): -20 °C - +35 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance according to IEC 62262: IK08, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 11.3 kg. With 5-pin connection terminal up to 2.5 mm2 for mains connection and mains forwarding. With two electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing institute. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes in the interests of progress.