Cubic, decorative LED wall light with protection class IP65. Cover plate made of hardened, highly transparent glass. With two light emission areas, direct-indirect beam. Can also be used in its entirety inside buildings. Surface-mounted light for wall mounting. The light is attached using a mounting plate made of cast aluminum. Mirror optics made of highly efficient aluminum. With asymmetric narrow beam light distribution. With asymmetric deep beam light distribution. Luminaire luminous flux and light color are fixed. Rated luminous flux 140 lm, rated power 15 W, maximum luminaire luminous efficacy 9 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. Luminaire body made of die-cast aluminum. Lamp body anodized, primed and powder-coated. Surface anthracite coated (DB 703). On request, the lamp body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), White textured (Akzo Nobel 8158870, similar to RAL 9016, V6), Gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Dimensions (L x W): 150 mm x 150 mm, lamp height 150 mm. On request, the lamp body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK08. Weight: 2.8 kg. The lamp is suitable for operation on a 230 V direct current network (DC). With electronic control gear, digitally dimmable (DALI). Control gear according to DALI-2 standard (EN 62386). The operating device is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire is suitable for operation on a 230V direct current network (DC). Surge voltage resistance differential mode / common mode: 4 kV / 2 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.