Device carrier for E-Line strip lighting system with LED safety light for illuminating areas. For use in combination with a central battery system type INOTEC JOKER. Monitoring in the form of individual light monitoring with detailed plain text / destination information. The device carriers with emergency light module are to be combined with a support profile concept through-wiring type 7LV + 7LV. Device carrier in combination with accessories 07650Fi...IP64 (support profile, cover, head piece) suitable for applications with increased requirements for the protection class (IP64) and for use in fire-hazardous premises in accordance with DIN EN 60598-2-24 (D-identification). Design in accordance with DIN VDE 0108 - 100, IEC 60598-1, IEC 60598-2-22, DIN 4844 and EN 1838. The device carrier is suitable for standard use in 230V generator-protected networks without monitoring functionality. For combination with support profiles E-Line Fix 0765... with separator plug spacing 375 mm suitable for IP20. Compatible with support profiles E-Line T5N/LED 07650.... As a single or strip light for direct ceiling mounting and suspended mounting using accessories that must be ordered separately. Fastened to the support profile using stainless steel snap locks that can be operated without tools. Proper assembly of the device carrier with the support profile is confirmed by a clicking sound. The transparent assembly elements made of UV-stabilized polycarbonate can be removed after successful assembly, thus ensuring protection against theft and dismantling. Optical system with optimized light distribution for illuminating escape routes with large light point heights (6 m - 10 m). With symmetrical, wide beam light intensity distribution. Maximum light point spacing with surface illumination with 1 lx according to EN 1838 taking into account a maintenance factor of 0.8: 17.7 m. Luminaire luminous flux and light color are fixed. 4-chip LED system for maximum safety. Rated luminous flux 545 lm, rated power 5.7 W, maximum luminaire luminous efficacy 96 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 3 SDCM. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Equipment carrier made of sheet steel. Surface coated white (RAL 9016). Dimensions (L x W) 368 mm x 62 mm. 75 mm maximum width thanks to locking technology. Permissible ambient temperature (ta): -15 °C - +45 °C. Weight: 0.5 kg. Automatic electrical connection via plug contacts with phase selection. The phase is selected without tools. LED driver with integrated individual LED monitoring to detect defective LEDs in the event of a short circuit or interruption. The operating device is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Freely programmable switching type for non-maintained light and permanent light of each individual luminaire without a separate bus line.Addressing with a fixed ID without manual addressing. Lights can be individually switched and dimmed via the system's control unit. High functional reliability through compliance with international standards on safety and operation, electromagnetic compatibility and immunity to interference. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE mark. Light 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.