LED post-top and extension luminaire. With intelligent label for quickly calling up luminaire information using a QR code. With power reduction via control phase. Switching off a control phase sets the luminaire luminous flux to 50%. For mast spigot Ø 76 mm. Tilt angle adjustable from 0°...25° for post-top mounting, 0°...15° for extension mounting. The mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with spigots Ø 42, 48 and 60 mm using reducers that must be ordered separately. Matching mast on request. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical wide beam light distribution. For lighting streets according to M5 and M6 lighting classes with a street width to light point height ratio of 0.4 to 0.8. Additional beam characteristics are available for flexible adaptation to customer-specific lighting tasks. Luminaire luminous flux adjustable in 3 levels, with constant luminous flux at the end of the service life (CLO). Rated luminous flux 5100 lm - 7500 lm, rated power 37 W - 62 W, maximum luminaire luminous efficacy 138 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The basic setting when delivered corresponds to that of the smallest adjustable luminous flux of the luminaire. Luminaire body made of die-cast aluminum. Luminaire body (primary color) and pivot point (additional color) in contrasting colors. Luminaire two-tone, light gray and anthracite gray powder-coated, highly weatherproof (RAL 7035 / RAL 7016). Coating suitable for marine weather on request. LED module consisting of a die-cast aluminum housing with integrated LED and optical lens systems. With sealed, clear cover made of PMMA. The LED module and the mounted operating device form an easily replaceable functional unit. The luminaire housing can be opened without tools using lever locks. Protection class (EN 61140): II, protection type (DIN EN 60529): IP66, shock resistance level according to IEC 62262: IK09. Mast available on request. Wind attack area fw 0.120 m2. Weight: 11.9 kg. With mounted connection cable. Length of the connecting cable 8 m. M20 screw connection as strain relief for cable diameters 6 mm to 12 mm. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV.The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing institute. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.