General
Rated luminous flux	5600 lm
Rated power	35 W
Luminous efficacy	160 lm/W
Colour of light	neutral white
Correlated colour temperature (CCT)	4000 K
Colour rendering index (CRI)	> 70
Colour point tolerance (initial MacAdam)	5 SDCM
Ambient temperature (ta)	25 °C
Degree of protection	IP66
Shock resistance rating	IK09
Protection class	II
Wind load area	0,090 m²
Connection cable length	8,0 m
Screw connection	M20
Cable diameter	6 to 12 mm
Flicker (Pst LM)	1,0
Maximum light point height	6000 mm
Mast pin diameter	76 mm
Inclination angle (surface mounting)	0°...25°
Tilt angle (wall mounting)	0°...-15°
Optical technology	Multi-Lens Technology (MLT)
Light sharing	asymmetric wide
Housing material	Aluminium die-cast
Surface coating	powder-coated, light grey (similar to RAL 7035) and anthracite grey (similar to RAL 7016)
Cover disc	PMMA, clear, sealed
Type of control gear	Electronic, switchable
Surge voltage withstand (Differential Mode)	6 kV
Surge voltage withstand (Common Mode)	10 kV

The Trilux 9701SG-AB7L-LR/5600-740 8G2 ET is an LED surface-mounted and cantilever luminaire for use on street poles, designed for illuminating traffic areas according to lighting classes M5 and M6. The luminaire is suitable for street widths in relation to mounting height ratios of 0.4 to 0.8 and is designed for a maximum mounting height of 6000 mm. It features an optical system in Multi-Lens-Technology (MLT), consisting of highly efficient, UV- and temperature-resistant lens systems, producing an asymmetrically wide light distribution. The tilt angles are adjustable: 0° to 25° for surface mounting, and 0° to -15° for cantilever mounting. Mounting is achieved using two stainless steel screws in accordance with EN 60598-2-3.

Applications

The luminaire is designed for outdoor use, particularly for street lighting in urban and rural areas. It meets the requirements of lighting classes M5 and M6, which are intended to ensure sufficient visibility and safety for traffic areas. The light distribution is designed to provide even illumination of the roadway, with the asymmetric beam characteristic enabling optimal light distribution along the street. Additional beam characteristics are available upon request for specific requirements.

Functions and Equipment in Detail

The luminaire features an intelligent label with a QR code, enabling quick access to technical information. A power reduction is possible via control phase: switching off one control phase reduces the light output to 50 %. The light colour is neutral white with a correlated colour temperature (CCT) of 4000 K and a general colour rendering index (CRI) of Ra > 70. The colour tolerance is 5 SDCM (initial MacAdam). The light source is fixed and provides constant light output at end of life (CLO). The average rated lifetime is 100,000 hours at an ambient temperature of 25 °C. The light source is replaceable in accordance with Ecodesign requirements (EU Regulation (EU) 2019/2020). A 3-step switch for adjusting different light outputs is available upon request.

Technology Explained Simply

The LED module consists of an aluminium die-cast housing with integrated LEDs and optical lens systems. The PMMA cover is sealed and clear to ensure high light transmittance. The module and the installed ballast form a easily replaceable functional unit, simplifying maintenance and repair. The luminaire housing can be opened without tools using lever locks. The protection rating IP66 ensures dust-tight and waterproof construction, suitable for outdoor use. The impact resistance rating IK09 protects the luminaire against mechanical impacts. Protection class II means the luminaire does not require a protective earth connection. The permissible ambient temperature is 25 °C. The wind load area is 0.090 m².

Compatibility and Accessories

The luminaire is equipped with an electronic ballast, which is also replaceable in accordance with Ecodesign requirements (EU Regulation (EU) 2019/2020). The surge voltage resistance is 6 kV (Differential Mode) and 10 kV (Common Mode). Suitable poles are available upon request. The luminaire is ENEC-certified and meets the essential requirements of applicable EU directives and the Product Safety Act. The CE marking is present.

Mounting and Installation

Mounting is performed on pole sockets with Ø 76 mm using two stainless steel screws. The tilt angles are adjustable, allowing the luminaire to be flexibly adapted to different mounting conditions. The factory-connected supply cable has a length of 8.0 m and is fitted with an M20 cable gland, serving as strain relief for cable diameters from 6 mm to 12 mm. The luminaire is powder-coated in two colours: light grey (similar to RAL 7035) and anthracite grey (similar to RAL 7016), with high weather resistance. A seawater-resistant coating is available upon request.

Operational Advantages

The luminaire offers a high luminous efficacy of 160 lm/W at a rated luminous flux of 5600 lm and a rated power of 35 W. The constant light output (CLO) ensures stable light performance throughout the entire lifetime. Flicker-free operation (Pst LM = 1.0 at full load) guarantees comfortable and disturbance-free lighting. The replaceability of LED module, ballast, and optical system reduces maintenance costs and increases the overall lifetime of the luminaire. Spare parts availability is guaranteed for 15 years from the invoice date, and the luminaire itself for 10 years.