Weight & dimensions
Width	133.35 mm
Memory
Memory bus	64 bit
Internal memory type	DDR2
Module configuration	128M X 64
Memory layout (modules x size)	1 x 1 GB
CAS latency	5
Memory type	DDR2
Memory clock speed	667 MHz
Memory voltage	1.8 V
Internal memory	1 GB
Registered	No
Other features
Error indication	Non-ECC
Memory layout	1 x 1024 MB
Form factor	240-pin DIMM
Warranty	Lifetime
Internal memory	1024 MB
Compatibility	377726-888 (HP); 398038-001 (HP); ET209AV (HP); KD840AV (HP); PX976AT (HP); RV636AV (HP)
Bus clock rate	667 MHz
Rack mounting	240-pin DIMM
Mac compatibility	No

LED damp-proof surface-mounted luminaire IP66 with PC luminaire body and PMMA diffuser Suitable for use in HACCP, IFS and/or BRC Global Standard Food certified companies. With limited surface temperature, suitable for use in fire-hazardous rooms in accordance with DIN EN 60598-2-24. With clipless locking technology for easy installation of the diffuser cover and luminaire body in accordance with the protection class after connection. For ceiling, wall and suspended installation. Ceiling mounting using the enclosed stainless steel mounting clip. Suspended installation possible using optional accessories. PMMA diffuser with internal prism structure. With symmetrical wide beam light distribution. Glare rating according to UGR classification (EN 12464-1) 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of recyclable, UV-resistant PC. Luminaire body color light gray (RAL 7035). With clipless locking technology for easy installation of the diffuser cover and luminaire body in accordance with the protection class after connection. Dimensions (L x W): 1257 mm x 102 mm, luminaire height 91 mm. Permissible ambient temperature (ta): -20 °C to +35 °C. Protection class (EN 61140): I, protection type (DIN EN 60529): IP66, shock resistance level according to IEC 62262: IK03, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 2.3 kg. With 3-pin connection terminal up to 2.5 mm2. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body.