LED bollard light with a square cross-section. With one light exit opening. For base mounting or installation with an anchor piece. Optical system designed using reflector technology. With asymmetrical medium-wide beam light distribution. Luminaire luminous flux and light color fixed. Rated luminous flux 700 lm, rated power 10.5 W, maximum luminaire luminous efficacy 67 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire housing made of aluminum profile, end elements made of die-cast aluminum. With housing screws made of stainless steel. Luminaire housing with highly weather-resistant powder coating. Color: anthracite, similar to DB 703. Coating suitable for marine weather on request. The lamp body can be made in the following colors on request at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Dimensions (L x W): 100 mm x 100 mm, lamp height 800 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, shock resistance level according to IEC 62262: IK07. Wind attack area fw 0.080 m2. Weight: 3.1 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The LED system with control gear is suitable for operation on direct current networks. Surge voltage resistance differential mode / common mode: 1 kV / 2 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.