Pivoting LED surface-mounted spotlight with a square cross-section and mounting bracket for outdoor use. For hanging or standing installation on fixed surfaces and walls. High-quality optical lens system. With rotationally symmetrical, wide beam light distribution. Beam angle 50°. Cover of the light exit opening made of hardened, highly transparent glass. Luminaire luminous flux and light color are fixed. LED system consisting of 3 high-performance LEDs. Rated luminous flux 450 lm, rated power 7.5 W, maximum luminaire luminous efficacy 60 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 3 SDCM. Other LED light colors available on request. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Luminaire housing made of aluminum profile, end elements made of die-cast aluminum. With housing screws made of stainless steel. Luminaire housing with highly weather-resistant powder coating. Surface anthracite coated (DB 703). On request, the luminaire body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), White textured (Akzo Nobel 8158870, similar to RAL 9016, V6), Gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Dimensions (L x W): 100 mm x 100 mm, luminaire height 500 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, shock resistance according to IEC 62262: IK08. Weight: 1.0 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The LED system with control gear is suitable for operation on direct current networks. Surge voltage resistance differential mode / common mode: 1 kV / 2 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.