Exclusive LED pendant light with direct and indirect luminous flux and a light line visible from the side. For use as a light strip center light. For suspended installation as part of a light strip in combination with individual lights. Cable suspension already included in delivery (2000 mm). Standard pendant length: 1000 mm. In addition to the usual installation parallel to the window front, the light can also be planned and installed parallel to the building axis. An H-LM light type from this series only works in combination with a light type HL. With internal, highly efficient micro-prismatic CDP-I. Clear cover panel with lateral light emission edge. With symmetrically limited wide beam light distribution. Glare rating according to UGR classification (EN 12464-1) 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of sheet steel. Head pieces made of PC. Surface coated in white (RAL 9016). Dimensions (L x W): 1504.8 mm x 102 mm, luminaire height 37 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP20, shock resistance level according to IEC 62262: IK02, test temperature glow wire test according to IEC 60695-2-11: 650 °C. Weight: 5.0 kg. Transparent connection cable included in delivery (1000 mm). With two electronic control devices, digitally dimmable (DALI). Control device according to DALI-2 standard (EN 62386). Luminaire can be switched and dimmed using a touch function via DALI control terminals (Touch DIM). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.