Rectangular LED wall light with protection class IP65. With two light emission areas, direct-indirect beam. The light's optical and technical design features harmonize with other lights that can be used in the project. Can also be used holistically inside the building. Surface-mounted light for wall mounting. The light is attached using a mounting plate made of cast aluminum. Mirror optics made of highly efficient aluminum. Cover plate made of transparent glass. With symmetrical wide beam light distribution. With symmetrical narrow beam light distribution. Luminaire luminous flux and light color fixed. Rated luminous flux 4000 lm, rated power 38 W, maximum luminaire luminous efficacy 105 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 70. Color tolerance (initial MacAdam) = 5 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. Luminaire body made of die-cast aluminum. Luminaire body anodized, primed and powder-coated. Surface anthracite coated (DB 703). On request, the luminaire body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), White textured (Akzo Nobel 8158870, similar to RAL 9016, V6), Gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Dimensions (L x W): 300 mm x 150 mm, luminaire height 150 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, shock resistance according to IEC 62262: IK05. Weight: 3.7 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). The luminaire is suitable for operation on a 230V direct current network (DC). Surge voltage resistance differential mode / common mode: 2 kV / 1 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking.