Decorative mast-top luminaire with curved, highly impact-resistant PMMA cover, parabolic mast top. With intelligent label for quickly calling up luminaire information using a QR code. With independent power reduction via integrated evaluation electronics. Reduction of the luminaire luminous flux to 50% for a period of 7 hours (-2h/+5h), distributed around a daily new center of the duty cycle. Mast-top luminaire for mast spigot Ø 76 mm. The mast is attached with two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with spigot Ø 60 mm using reducers that can be ordered separately. Matching mast on request. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With rotationally symmetrical, wide beam light distribution. Optimized for horizontal alignment of the luminaire body. Additional beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear/side shield is possible as an accessory that must be ordered separately. Luminaire luminous flux and light color are fixed, with constant luminous flux at the end of the service life (CLO). With 6 LED modules. LED module consisting of four LEDs, including optical system. Rated luminous flux 3800 lm, rated power 39 W, maximum luminaire luminous efficacy 97 lm/W. Light color warm white, correlated color temperature (CCT) 3000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Surface anthracite coated (DB 703). Coating suitable for marine weather on request. Tilt angle adjustable. Adjustment can be locked in 10° increments between 0° and 90°. With curved cover made of highly impact-resistant PMMA. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection class lamp compartment: IP66. Shock resistance level according to IEC 62262: IK08. Protection class lamp compartment: IP66. Mast available on request. Wind attack area fw 0.080 m2. Weight: 8.7 kg. Equipment carrier with all electrical components and LED modules mounted as the upper luminaire end. Can be removed after loosening four V2A fastening screws. With control gear, switchable. The operating device is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years,Spare parts (LED module, control gear, optical system) available for 15 years after the invoice date, subject to reasonable changes in the interests of progress.