Trilux 6675140, EAN: 4018242341528

Trilux Publisca P1 AB2L LR/4600 740 6G 1S ET LED outdoor light 46W IP66 6675140 - Publisca

Trilux Publisca P1 AB2L LR/4600 740 6G 1S ET LED outdoor light 46W IP66 6675140 - Publisca

Lieske Part No.322862
Mfg Part No6675140
EAN-Code4018242341528
Manufacturer Trilux
Here only 1.265,22 EUR
1.505,61 EUR incl. VAT

Further information for Trilux Publisca P1 AB2L LR/4600 740 6G 1S ET LED outdoor light 46W IP66 6675140 - Publisca

Design
Form factorATX
Cooling typeActive
Weight & dimensions
Depth43 mm
Width184 mm
Height136 mm
Performance
DirectX version12.0
OpenGL version4.4
PhysXYes
Dual Link DVIYes
NVIDIA GameWorks VRNo
Full HDYes
TV tuner integratedNo
HDCPYes
NVIDIA G-SYNCYes
Memory
Discrete graphics adapter memory2 GB
Graphics adapter memory typeGDDR5-SDRAM
Memory clock speed5400 MHz
Memory bus128 bit
Ports & interfaces
DVI-I ports quantity1
HDMI ports quantity2
Interface typePCI Express 3.0
DVI port2
DVI-D ports quantity1
Power
Minimum system power supply400 W
Processor
Processor boost clock speed1085 MHz
Processor frequency1020 MHz
CUDAYes
CUDA cores640
Parallel processing technology supportNo
Graphics processor familyNVIDIA
Maximum displays per videocard4
FireStreamNo
Graphics processorGeForce GTX 750 Ti
Maximum resolution4096 x 2160 pixels
System requirements
Windows operating systems supportedYes
Linux operating systems supportedYes
Decorative mast-top luminaire with flat cover plate, parabolic mast top. With intelligent label for quickly calling up luminaire information using a QR code. With power reduction via control phase. Switching off a control phase causes the luminaire luminous flux to be set to 50%. Mast-top luminaire for mast spigot Ø 76 mm. The mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with spigot Ø 60 mm using reducers that can be ordered separately. Matching mast on request. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical wide beam light distribution. Optimized for horizontal alignment of the luminaire body. Other beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory to be ordered separately. Luminaire luminous flux and light color are fixed, with constant luminous flux at the end of the service life (CLO). With 6 LED modules. LED module consisting of four LEDs, including optical system. Rated luminous flux 4600 lm, rated power 42 W, maximum luminaire luminous efficacy 110 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum. Surface coated in anthracite (DB 703). Coating suitable for marine weather on request. Adjustable angle of inclination. Adjustment can be locked in 10° increments between 0° and 90°. Cover plate made of heat-treated single-pane safety glass (ESG-H). Cover plate sealed in the luminaire body. With a transmission level of > 98%. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection class lamp compartment: IP66. Impact resistance level according to IEC 62262: IK08. Protection class lamp compartment: IP66. Mast available on request. Wind attack area fw 0.080 m2. Weight: 9.0 kg. Equipment carrier with all electrical components and LED modules mounted as the upper luminaire cover. Can be removed after loosening four V2A fastening screws. With control gear, switchable. The operating device is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module,Operating device, optical system) 15 years after the invoice date subject to reasonable changes in the interests of progress.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

http://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/322862
qrcode für Trilux Publisca P1 AB2L LR/4600 740 6G 1S ET LED outdoor light 46W IP66 6675140 - Publisca