Decorative mast-top light with flat cover plate, parabolic mast top. With intelligent label for quickly calling up luminaire information using a QR code. Mast-top light for mast top Ø 76 mm, the mast is attached using two stainless steel fastening screws in accordance with EN 60598-2-3. Also suitable for mounting on masts with a Ø 60 mm top using reducers that must be ordered separately. Matching mast on request. Optical system designed in multi-lens technology (MLT). Luminaire optics consisting of highly efficient, UV and temperature-resistant lens systems. With asymmetrical wide beam light distribution. Optimized for horizontal alignment of the luminaire body. Additional beam characteristics are available for flexible adaptation to customer-specific lighting tasks. The subsequent installation of a rear / side shield is possible as an accessory that must be ordered separately. Luminaire luminous flux and light color are fixed, with constant luminous flux at the end of the service life (CLO). With 2 LED modules. LED module consisting of four LEDs, including optical system. Rated luminous flux 1000 lm, rated power 10 W, maximum luminaire luminous efficacy 100 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 70. Color location tolerance (initial MacAdam) = 5 SDCM. Other LED light colors available on request. Average rated service life LCLO(tq 25 °C) = 100,000 h. The light source is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Luminaire body made of die-cast aluminum. Surface anthracite coated (DB 703). Coating suitable for marine weather on request. Tilt angle adjustable. Can be locked in 10° increments between 0° and 90°. Cover panel made of heat-treated toughened safety glass (ESG-H). Cover panel sealed in the luminaire body. With a transmission level of > 98%. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection class lamp compartment: IP66. Impact resistance level according to IEC 62262: IK08. Protection class lamp compartment: IP66. Mast available on request. Wind attack area fw 0.080 m2. Weight: 9.0 kg. Device carrier with all electrical components and LED modules mounted as the upper luminaire cover. Can be removed after loosening four V2A fastening screws. With control gear, digitally dimmable (DALI). Control gear in accordance with DALI-2 standard (EN 62386). The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Surge voltage resistance Differential Mode / Common Mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the Product Safety Act and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing institute. Luminaire 10 years, spare parts (LED module, control gear,optical system) 15 years after the invoice date, subject to reasonable changes in the interests of progress.