General
Manufacturer	Trilux
Product type	Mast-mounted luminaire
Application range	outdoor luminaire for streets / pole
Luminous flux	3800 lm
Rated power	33 W
Luminous efficacy	115 lm/W
Colour of light	warm white
Colour temperature	3000 K
Colour rendering index	> 70
Colour tolerance	5 SDCM
Luminous flux constancy	CLO
LED modules	6
Optics technology	Multi-Lens Technology (MLT)
Light sharing	asymmetric wide
Degree of protection luminaire	IP23
Degree of protection lamp compartment	IP66
Protection class	II
Shock resistance	IK08
Permissible ambient temperature	35 °C
Wind load area	0,080 m²
Tilt angle	0° to 90° in 10° increments
End cap	ESG-H, heat-treated
Transmission factor	> 98 %
Pole fastening	Ø 76 mm, stainless steel screws
Reducers	for Ø 60 mm, available separately
Certification	DarkSky, ENEC, CE
Eco-design	light source and operating device interchangeable
Flicker	Pst LM = 1.0
Spare parts availability	15 years

The Trilux Publisca P1-AB2L-LRA/3800-730 6G1S ET is a decorative mast-mounted luminaire for outdoor use, specifically designed for street and mast lighting. The device features a parabolic mast mount and a flat cover disc, which together with the anthracite-coated aluminium die-cast body provide an aesthetic appearance. Mounting is achieved using two stainless steel screws in accordance with EN 60598-2-3. The maximum mounting height is 5000 mm, with the light point height also reaching up to 5000 mm.

Applications
This luminaire is suitable for use in urban and rural outdoor areas, particularly for illuminating streets, parking lots, pedestrian zones, and other public spaces. The asymmetrically wide light distribution ensures even and efficient illumination of the area beneath the luminaire. The luminaire is DarkSky-certified, meaning it meets requirements for sustainable and light-pollution-reducing lighting. The optimised horizontal orientation of the luminaire body supports precise light distribution.

Functions and Equipment in Detail
The luminaire features an intelligent label with a QR code, enabling quick access to technical information. An integrated evaluation electronics system allows for autonomous power reduction: the light output is automatically reduced to 50 %, distributed over a period of 7 hours (−2h/+5h), and reset daily to a newly determined midpoint of the switching duration. The light colour is warm white with a correlated colour temperature (CCT) of 3000 K and a general colour rendering index (CRI) of Ra > 70. The colour tolerance is 5 SDCM (initial MacAdam). The luminaire is equipped with 6 LED modules, each consisting of four LEDs and connected to an optical system. The rated power is 33 W, the rated luminous flux is 3800 lm, corresponding to a maximum luminous efficacy of 115 lm/W. The luminous flux maintenance at end of life (CLO) ensures consistent light output throughout the entire lifespan.

Technology Explained Simply
The optical system is based on Multi-Lens Technology (MLT), consisting of highly efficient, UV- and temperature-resistant lens systems. The cover is made of heat-treated single-pane safety glass (ESG-H) and is sealed into the luminaire body, achieving a transmission rate of over 98 %. The luminaire is equipped with a device carrier that mounts all electrical components and LED modules as the upper closure. This can be removed by loosening four stainless steel screws (V2A), facilitating maintenance and component replacement. The light source and control gear are replaceable in accordance with Ecodesign requirements (EU Regulation (EU) 2019/2020). Flicker is Pst LM = 1.0 at full load, ensuring flicker-free lighting.

Compatibility and Accessories
Additional light distribution characteristics are available upon request. The luminaire is equipped with a switchable control gear. A suitable mast is available upon request.

Mounting and Installation
Mounting is done on a mast tip with Ø 76 mm using two stainless steel screws. The tilt angle of the luminaire body is adjustable and lockable in 10° increments between 0° and 90°. The maximum wind load area is 0.080 m². The permissible ambient temperature (ta) is 35 °C. The luminaire is optimised for horizontal orientation, ensuring precise light distribution.

Operational Advantages
The luminaire offers a high service life of 100,000 hours (LCLO at tq 35 °C) and comes with a 10-year warranty for the luminaire, as well as 15 years of spare part availability (LED module, control gear, optical system). The protection rating of the lamp compartment is IP66, providing high protection against dust and water. The protection class is II, and the impact resistance is IK08. The surge voltage resistance is 6 kV (Differential Mode) and 10 kV (Common Mode). The luminaire meets the requirements of applicable EU directives and the Product Safety Act and carries the CE marking. Additionally, it is ENEC-certified.

Protection Rating and Environmental Conditions
The protection rating of the luminaire is IP23, while the lamp compartment is protected to IP66. This makes the luminaire suitable for outdoor use, especially in areas with high humidity or precipitation. A seawater-resistant coating is available upon request. The permissible ambient temperature is 35 °C, enabling use in mild to warm climate zones.

Certifications and Conformity
The luminaire meets the basic requirements of applicable EU directives and the Product Safety Act and carries the CE marking. Additionally, it is independently tested and ENEC-certified. The DarkSky certification confirms the luminaire’s low-light-pollution design. The Ecodesign requirements (EU Regulation (EU) 2019/2020) are fulfilled for both light source and control gear.