Decorative mushroom light for mast mounting. With intelligent label for quick access to luminaire information using a QR code. With independent power reduction via integrated evaluation electronics. Reduction of the luminaire luminous flux to 50% for a period of 7 hours (-2h/+5h), distributed around a daily new center point of the duty cycle. For mast top Ø 76 mm. Also suitable for mounting on masts with a top Ø 60 mm using reducers that can be ordered separately. Matching mast on request. Optical system made of high-gloss, anodized aluminum. With symmetrical, wide beam light distribution. Luminaire luminous flux and light color fixed, with constant luminous flux at the end of the service life (CLO). Rated luminous flux 2200 lm, rated power 28 W, maximum luminaire luminous efficacy 79 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum, luminaire roof made of corrosion-resistant aluminum, highly weather-resistant powder-coated. Color of luminaire body and luminaire roof outside deep black, similar to RAL 9005. Luminaire roof inside powder-coated white. Coating suitable for marine weather on request. Cover made of highly impact-resistant PMMA in mushroom shape, clear. Luminaire cover can be pushed up into a self-locking service position. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection type of lamp compartment: IP65. Shock resistance according to IEC 62262: IK04. Protection class of lamp compartment: IP65. Mast available on request. Wind attack area fw 0.340 m2. Weight: 7.2 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Electroblock with all electrical components can be replaced without tools. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE marking. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.