Decorative lantern for mast mounting. With intelligent label for quick access to luminaire information using a QR code. For mast top Ø 76 mm. Also suitable for mounting on masts with a Ø 60 mm top using reducers that must be ordered separately. Matching mast on request. Optical system made of high-gloss, anodized aluminum. With rotationally symmetrical, wide-beam light distribution. Luminaire luminous flux and light color fixed, with luminous flux constant at the end of the service life (CLO). With LED system, rated luminous flux 1800 lm, rated power 21 W, maximum luminaire luminous efficacy 86 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 3 SDCM. Average rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Luminaire body made of die-cast aluminum, luminaire roof made of corrosion-resistant aluminum, highly weather-resistant powder-coated. Color of luminaire body and luminaire roof on the outside: deep black, similar to RAL 9005. Luminaire roof on the inside: white powder-coated. Coating suitable for marine weather on request. End cylinder made of highly impact-resistant PMMA, clear. Luminaire cover can be pushed up into a self-locking service position. Protection class (EN 61140): II, protection type (DIN EN 60529): IP23, protection type lamp compartment: IP65. Shock resistance level according to IEC 62262: IK04. Protection type lamp compartment: IP65. Mast available on request. Wind attack area fw 0.470 m2. Weight: 9.1 kg. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Electroblock with all electrical components can be replaced without tools. Surge voltage resistance differential mode / common mode: 6 kV / 10 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE mark. In addition, the luminaire is ENEC-certified by an independent testing body. Luminaire 10 years, spare parts (LED module, control gear, optical system) 15 years after the invoice date, subject to reasonable changes that serve progress.