Recessed floor spotlights for accent lighting, can be walked on and driven over. For installation in the floor. A foundation with sufficient drainage and appropriate load must be provided on site. With rotationally symmetrical, deep beam light distribution. Beam angle 10°. Luminaire luminous flux and light color are fixed. LED system with 9 LEDs. Rated luminous flux 350 lm, rated power 18 W, maximum luminaire luminous efficacy 19 lm/W. Light color blue. Color tolerance (initial MacAdam) = 3 SDCM. Other LED light colors available on request. Average rated service life L80(tq 25 °C) = 50,000 h. Spotlight housing made of die-cast aluminum. Color black (RAL 9005). Cover ring permanently attached with locking screws and threaded inserts made of stainless steel. Cover plate made of 15 mm thick, clear, tempered glass. Can be driven over at walking speed up to 2000 kg. Protection class (EN 61140): I, protection type (DIN EN 60529): IP68, shock resistance according to IEC 62262: IK10. Weight: 3.8 kg. Wired ready for connection. With connection cable leading to the outside, sealed in accordance with the protection type. Internal connection compartment sealed with epoxy resin. The light is suitable for operation on a 230V direct current network (DC). With electronic control gear, switchable. Surge voltage resistance differential mode / common mode: 2 kV / 1 kV. The product meets the basic requirements of the applicable EU directives and the product safety law and bears the CE mark.