LED compact spotlight for accent lighting. The luminaire is part of a series with variants that cover different lighting requirements with the same luminaire design. For direct installation on a solid surface. With ground spike (accessory) suitable for fastening in the ground. Mast fastening using a stainless steel mast clamp (accessory). Clamping range Ø 40-130 mm. With rotationally symmetrical, deep beam light distribution. Maximum light intensity at beam angle 2 x 6°. Beam angle 10°. Luminaire luminous flux and light color fixed. With LED lens system. Number of LEDs: 18. Rated luminous flux 4200 lm, rated power 43 W, maximum luminaire luminous efficacy 98 lm/W. Light color neutral white, correlated color temperature (CCT) 4000 K, general color rendering index (CRI) Ra > 80. Color location tolerance (initial MacAdam) = 4 SDCM. Other LED light colors available on request. Average rated service life L80(tq 35 °C) = 50,000 h. The light source is replaceable in accordance with the ecodesign requirements (Regulation (EU) 2019/2020). Spotlight housing made of die-cast aluminum. Surface anthracite coated (DB 703). With metallic effect, highly weather-resistant. On request, the lamp body can be made in the following colors at no extra cost: Black textured (Akzo Nobel 8118669, similar to RAL 9005, V5), white textured (Akzo Nobel 8158870, similar to RAL 9016, V6), gray textured (Akzo Nobel 8129595, similar to RAL 9006, V7). Other color variants according to RAL or DB color code are available on request for an additional charge. Rotatable and pivotable, pivot range 195°, pivot range 360°. With flat cover screen, extra-clear, 5 mm. Protection class (EN 61140): I, protection type (DIN EN 60529): IP65, protection class lamp compartment: IP65. Shock resistance level according to IEC 62262: IK06. Protection class lamp compartment: IP65. Weight: 6.2 kg. Equipped at the factory with 5000 mm connection cable. Cable glands for connection cable Pg13, Ø 5 mm - 12 mm. With electronic control gear, switchable. The control gear is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). The LED system with control gear is suitable for operation on direct current networks. Surge voltage resistance differential mode / common mode: 1 kV / 2 kV. The product meets the essential requirements of the applicable EU directives and the Product Safety Act and bears the CE marking.