TP-Link TL-SG3428XF, EAN: 4897098688212

TP-Link TL-SG3428XF Switch 24-Port SFP L2+

Networks > Switches

TP-Link TL-SG3428XF Switch 24-Port SFP L2+

Lieske Part No. 1996652
Mfg Part No TL-SG3428XF
EAN-Code 4897098688212
Manufacturer TP-Link
Here only 479,52 EUR
570,63 EUR incl. VAT

Further information for TP-Link TL-SG3428XF Switch 24-Port SFP L2+

Data transmission
Switching capacity128 Gbit/s
Forwarding rate95.23 Mpps
MAC address table16000 entries
Number of static routes48
Jumbo frames9000
Packet buffer memory12 MB
Store-and-forwardYes
Static routeYes
Jumbo frames supportYes
Design
Form factor1U
Product colourBlack
Number of fans1 fan(s)
Rack mountingYes
LED indicatorsYes
Management features
Switch typeManaged
Switch layerL2+
MIB supportRFC1213, RFC2233, RFC1643, RFC1493, RFC2674, RFC2819, RFC2021, RFC2620, RFC2618, RFC2925
Quality of Service (QoS) supportYes
Web-based managementYes
Cloud-managedYes
ARP inspectionYes
Configuring Location Settings (CLI)Yes
System event logYes
Multicast features
Multicast Listener Discovery (MLD) snoopingY
Multicast supportYes
Network
Networking standardsIEEE 802.11d, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Routing entries512
Ethernet LAN data rates10,100,1000,10000 Mbit/s
IPv4 routes48
IPv6 routes48
Virtual LAN featuresPort-based VLAN, Private VLAN, Tagged VLAN, VLAN mapping, Voice VLAN
Number of VLANs4000
10G supportYes
Port mirroringYes
IP routingYes
Policy-based routingYes
Flow control supportYes
Link aggregationYes
Broadcast storm controlYes
Rate limitingYes
Spanning tree protocolYes
Head-of-line (HOL) blockingYes
Active link detectionYes
VLAN supportYes
Operational conditions
Operating temperature (T-T)0 - 45 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90%
Storage relative humidity (H-H)5 - 90%
Heat dissipation121.81 BTU/h
Packaging content
Cables includedAC
ManualYes
Rack mount kitYes
Ports & interfaces
Combo SFP ports quantity4
SFP+ module slots quantity4
Fiber ports quantity20
Fiber optic connectorSFP, SFP+
Console portRJ-45/Micro-USB
Power connectorAC-in jack
Basic switching RJ-45 Ethernet ports typeNo
Power
Power sourceAC
Number of power supply units2
Power consumption (max)35.7 W
Power supply includedYes
Redundant power supply (RPS) supportYes
Power over Ethernet (PoE)
Power over Ethernet (PoE)No
Protocols
Management protocolsSNMPv1/v2c/v3, SNTP
IPv4 & IPv6 featuresIPv4/IPv6 access-control list (ACL), IPv6 Telnet, IPv6 ping, IPv6 tracert
GARP VLAN Registration Protocol (GVRP)Yes
Security
DHCP featuresDHCP client, DHCP relay, DHCP server
AuthenticationAuto VLAN, Guest VLAN, MAC-based authentication, Port-based authentication
Authentication typeAAA, RADIUS, TACACS+
Queue scheduling algorithmsSP, WRR+SP, Weighted Round Robin (WRR)
Access Control List (ACL)Yes
IGMP snoopingYes
IGMP proxyYes
MAC address filteringYes
SSH/SSL supportYes
Loop protectionYes
BPDU filtering/protectionYes
IP-MAC-Port bindingYes
Password protectionYes
Weight & dimensions
Width440 mm
Depth220 mm
Height44 mm
The TP-Link TL-SG3428XF is a fully managed L2+ Switch from the Omada series, designed for use in enterprise networks, campus infrastructures, and ISP environments. It offers a comprehensive range of management and security functions, as well as high network performance tailored to the requirements of modern networks. The switch features 24 fiber ports, including 20 Gigabit-SFP-Ports and 4 Gigabit-SFP/RJ45-Combo-Ports, supplemented by 4 10G-SFP+-Ports for uplink. This configuration enables a flexible and scalable network architecture suitable for connecting with other switches and integrating end devices.

Applications

The TL-SG3428XF is designed for use in medium to large networks where central management, high bandwidth, and advanced security functions are required. It is particularly well-suited for environments requiring stable and secure data transmission over fiber optic cables, such as office buildings, schools, hotels, or retail stores. Integration with the Omada SDN system enables centralized control via the cloud, allowing network management regardless of location.

Functions and Features in Detail

The switch supports static routing with up to 48 IPv4 and 48 IPv6 routes, enabling efficient forwarding of internal traffic. Quality of Service (QoS) functions at L2/L3/L4 level ensure prioritized data transmission, especially for voice and video applications. This includes IGMP-Snooping and MLD-Snooping, which optimize multicast traffic. VLAN support includes port-based VLAN, private VLAN, tagged VLAN, VLAN mapping, and voice VLAN, with up to 4000 VLANs configurable. Access Control Lists (ACLs) allow fine-grained control of network access based on MAC addresses, IP addresses, ports, and VLAN IDs.

Technology Explained Simply

The switching capacity is 128 Gbit/s, ensuring non-blocking data processing. The transfer rate is 95.23 Mpps, and the MAC address table contains 16,000 entries, enabling efficient device detection and addressing. The switch supports Jumbo Frames up to 9000 bytes, increasing efficiency when transmitting large data packets. The Store-and-Forward technology ensures error-free data transmission by receiving and verifying the entire message before forwarding. The data packet buffer memory of 12 MB supports data traffic processing under high loads.

Compatibility and Accessories

The TL-SG3428XF is compatible with SFP and SFP+ modules available for various fiber optic cable types (single-mode, multi-mode) and distances. Compatible modules include, for example, the MiniGBIC Module 10GBit SFP+ LC Single-Mode LX TL-SM5110-LR, the MiniGBIC Module 1 GBit SFP LC Singlemode LX TL-SM311LS, or the SFP+ Direct Attach Cable 3 m SM5220-3M. These modules allow flexible adaptation to specific network requirements. The Omada SDN platform supports centralized management via the cloud, with features such as Zero-Touch Provisioning (ZTP) and intelligent monitoring simplifying network administration.

Mounting and Installation

The switch is designed as a 1U rack device and can be installed in standard 19-inch racks. It features a console port with RJ-45/Micro-USB connection for local configuration via CLI (Command Line Interface). The power supply is provided by an integrated AC power unit, with support for redundant power supply using two power supply units to increase availability. The operating temperature ranges from 0 to 45 °C, and the storage temperature can range from -40 to 70 °C. The relative humidity during operation is 10–90 %, and during storage, 5–90 %.

Operational Advantages

The TL-SG3428XF offers high network security through features such as IP-MAC-Port binding, BPDU filtering, loop protection, DHCP Snooping, and DoS defense. Authentication options include 802.1X, AAA, RADIUS, and TACACS+, enabling secure access control. Web-based management, along with support for SNMPv1/v2c/v3, SNTP, and Dual Image, provides various options for configuration and maintenance. System event logging and MIB support according to RFC standard facilitate network monitoring and diagnostics. LED indicators support visual status monitoring of the device.

Scope of Delivery

The scope of delivery includes the TL-SG3428XF switch, a power cable, a quick installation guide, a rack mount kit, and rubber feet. These components enable quick and easy installation in the rack.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1996652
qrcode für TP-Link TL-SG3428XF Switch 24-Port SFP L2+