TP-Link TL-PoE160S, EAN: 6935364073084

TP-Link TL-PoE160S PoE Injector Adapter

Networks > Accessories > Power Supply / Wall Plug Transformers

TP-Link TL-PoE160S PoE Injector Adapter

Lieske Part No. 348024
Mfg Part No TL-PoE160S
EAN-Code 6935364073084
Manufacturer TP-Link
Here only 18,49 EUR
22,00 EUR incl. VAT

Further information for TP-Link TL-PoE160S PoE Injector Adapter

Certificates
CertificationFCC, CE, RoHS
Features
Product colourBlack
Maximum operating distance100 m
LED indicatorsPower
Wall mountableYes
Plug and PlayYes
Logistics data
Harmonized System (HS) code85044095
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000
Networking standardsIEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u
Cable types supportedCat3, Cat4, Cat5, Cat5e
Power over Ethernet (PoE)Yes
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90%
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 90%
Packaging content
Number of products included1 pc(s)
Packaging contentTL-POE160S, power cord, RJ45 cable, installation guide, wall-mounting kits
Wall mounting kitYes
Power cord includedYes
Quick installation guideYes
Packaging data
Package width170 mm
Package depth230 mm
Package height80 mm
Package weight460 g
Package typeBox
Ports & interfaces
Ethernet LAN (RJ-45) ports2
RJ-45 input ports1
RJ-45 output ports1
Power
Output power30 W
AC adapter input voltage100 - 240 V
AC adapter frequency50/60 Hz
Weight & dimensions
Width125 mm
Depth59.4 mm
Height36.8 mm
The TP-Link TL-PoE160S is a PoE+ injector designed for simultaneous transmission of network data and power over a single Ethernet cable. It is intended for use in networks where no direct power supply is available, for example, when installing Access Points, IP cameras, or IP phones. The device complies with IEEE 802.3af/at standards and thus supports PoE technology, which enables data and power to be transmitted over the same cable. The maximum output power is 30 W, sufficient to supply PoE-compatible devices with high power demand. The integrated power supply accepts an input voltage of 100 to 240 V at a frequency of 50/60 Hz, enabling worldwide use.

Applications
This injector is suitable for extending networks in areas where no power outlet or electrical wiring is available. Typical applications include installing IP cameras outdoors, powering wireless access points in large rooms, or using IP phones in offices without direct power supply. The maximum cable length is 100 meters, and the cabling is compatible with Cat3, Cat4, Cat5, and Cat5e cable types. Support for IEEE 802.3i, IEEE 802.3u, and IEEE 802.3ab standards ensures compatibility with various network environments.

Functions and Features in Detail
The TL-PoE160S features two Gigabit Ethernet ports: one RJ-45 input port for data transmission and one RJ-45 output port that transmits both data and power. The data transmission rate reaches up to 1000 Mbit/s, ensuring fast network connections. Automatic detection of the connected device’s power requirement ensures only the necessary power is supplied, increasing efficiency and safety. An LED indicator signals normal operation of the power supply. The device is designed for indoor use, with an operating temperature of 0 to 40 °C and relative humidity of 10 to 90 %.

Technology Explained Simply
The PoE+ injector uses Power over Ethernet (PoE) technology, transmitting power and data over a single Ethernet cable. This reduces the need for additional power lines and simplifies installation. The integrated power supply allows direct control via the network without requiring an external power adapter. The plug-and-play function means no configuration is required—the device is immediately operational once connected. Wall mounting is possible, facilitating installation in various environments.

Compatibility and Accessories
The injector is compatible with all IEEE 802.3af/at-compatible Powered Devices (PDs) and PoE receiver adapters such as the TP-Link TL-POE10R or comparable devices. It can be used in combination with PoE splitters or other PoE adapters to flexibly expand network infrastructure. Use with devices such as IP cameras, access points, or IP phones is standard, provided they support PoE technology.

Installation and Mounting
Installation is straightforward: the device is connected to a power source and linked to the network via the RJ-45 input port. The output port is connected to the PoE-enabled device. Wall mounting is possible using the included mounting kit, allowing use in vertical installation scenarios. The compact design, with dimensions of 125 mm (width) × 59.4 mm (depth) × 36.8 mm (height), enables flexible placement.

Operational Advantages
The TL-PoE160S reduces infrastructure costs by eliminating the need for additional power lines. The plug-and-play function and automatic power regulation ensure easy and safe operation. Support for Gigabit transmission rates guarantees high network performance. Certification to FCC, CE, and RoHS standards confirms compliance with international safety and environmental regulations. The device is suitable for use in offices, small businesses, and private environments where flexible and cost-efficient network power supply is required.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/348024
qrcode für TP-Link TL-PoE160S PoE Injector Adapter