TP-LINK s 2.4GHz 300Mbit / s 9dBi outdoor Access Point CPE210 is the cost-effective alternative for wireless outdoor networks. With its central management application makes it ideal for point-to-point, point-to-multipoint and area-wide applications. Professional performance combined with user-friendly design make the CPE210 an ideal choice for business and private users.
Highlights
- 2 internal dual polarized 9dBi-directional antennas for 2 × 2 MIMO
- transmit power up to 500mW (27dBm) for large transmission distances
- Suitable for long-distance transmissions (further than 5km)
- TP-LINK s Pharos MAXtream-TDMA (Time-Division- Multiple Access) technique improves throughput, transmission capacity and latency, ideal for PTMP applications
- Centralized management system Pharos Control
- Operating modes: AP / Client / Repeater / AP-Router / AP Client Router (WISP Client)
- Supports passive PoE up to 60m and a remote reboot> antenna characteristics - db gain: 9 dB
- WIFI
Interfaces
- WIFI
- Wi-Fi IEEE 802.11b
- IEEE 802.11g wireless standard
- WLAN IEEE 802.11n standard
Data Transfer
- Up to 300 Mbit / s transfer rate
Memory
- 64 MB RAM> System Connections - Number of Ethernet ports 10/100 Mbit / s: 2
Basic Properties
- Color white
- Height: 224 mm
- Width: 79 mm
- Depth: 60 mm
Technical description
- Up to 300Mbps (40MHz, dynamic)
- Up to 144,4Mbps (20MHz, dynamic)
- Up to 72,2Mbps (10MHz, dynamic)
- Up to 36,1Mbps (5MHz,
dynamic)Wi-Fi configuration options
- Pharos MAXtream- TDMA technology
- 802.11b / g / n
- channel width: 5, 10, 20 or 40MHz
- Automatic channel selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS on / off
- Security: WPA / WPA2, WPA-PSK / WPA2-PSK (AES / TKIP), WEP with 64, 128 or 152 bits
- SSID broadcast controllable
- Multi-SSID with VLAN tagging (only in AP mode)
- configurable distance setting / ACK timeout
- MAC address filtering
- Ortungsintervall/RTS-Grenzwert/Fragmentierungsgrenzwert/DTIM-Intervall/AP-Isolierung/Short-GI/WiFi-Multimedia (WMM)
Delivery
- Outdoor Wireless Access Point
- Adapters Passive PoE (24V / 1A)
- cable ties for pole mounting
- voltage cables
- Installation Instructions