21-2906-IP
Module Camera (IP)
• IP camera
• Incl. anti-twist protection for correct module installation
• Front panel: aluminum in V2A design
• Material thickness: 4 mm
• Dimensions (H x W): 90 x 90 mm
Technical Data Camera
equipment
• Power supply via PoE
• LED lighting ring (white)
• Digital PTZ
• ONVIF Compatible for use with video surveillance systems from different manufacturers
Optics
• 1/10,2 cm ( 4 inch ) CMOS sensor
• Focal length 2.8 mm, F2.8
• Horizontal image angle 118°
• Vertical image angle 66°
• Illumination 1.5 - 100000 lux, F2.8, 0 lux with LED lighting switched on
• Shutter speed 1/8000s to 1/6s
video
• Motion JPEG, H.264 compression
• Resolution HDTP 1080p 1920 x 1080 to 320 x 240 pixels
• 25 frames / s in all resolutions and compression types
Network
• IPv4/ v6, HTTP, HTTPS *, SSL / TLS *, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1 / v2c / v3(MIB- II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS.
• Password protected web interface
• HTTPS encryption

• This product contains software provided by the OpenSSL
Project for use was developed in the OpenSSL Toolkit
(www.openssl.org).
21-4403
frame, size 4
• Installation option for four modules
• vertical
• Incl. anti-twist protection for correct module installation
• Front panel: aluminum in V2A design
• Material thickness: 4 mm
• Dimensions (H x W): 390 x 120 mm
20 -0001A-IP
Electronics compact (SIP), size 3
• Basic electronics size 3 for door stations with integrated electronics
• Connection of up to 8 call buttons, 1 touchpad, 1 display, 1 loudspeaker, 1 microphone
• 2 switching relays (max. switching capacity: 2 A / 30VDC, 0.5 A / 40VAC): 1 make contact, 1 changeover contact
• 1 alarm input (input voltage 10 V= to max. 15 V=)
• RJ45 port for 100baseTEthernet, alternatively via screw terminal (EIA / TIA 568 A)
• additional RJ45 port for connecting additional IP devices, e.g. B. IP camera (no screw terminals)
• Large housing (possibility of installing an electronics extension)
• Dimensions (H x W x D): 288 x 108 x 72 mm
Electronics: • Voice connection via Voice over IP (VoIP) according to the SIP standard via the connected Ethernet LAN using a SIP-capable telephone system, a SIP provider or direct dialing of an IP address
• Configuration and software updates via web browser
• Power supply: Power over Ethernet (PoE) according to IEEE 802.3af
• Integrated PoE switch (VLAN support) for connecting another PoE-capable device with a maximum power consumption of 7 W
• Full duplex operation (integrated acoustic echo suppression)
• Collective call function / redial
• Status / remote control messages for integration with third-party software
• 9 voice announcements, each storable for up to 40 seconds
• 16 MB shared flash memory for telephone book and voice announcements
• Configuration can be saved in a file
Technical data
network
• MAC address (IEEE 802.3)
• IPv4 - Internet Protocol Version 4 (RFC 791)
• ARP – Address Resolution Protocol
• DNS – A record (RFC 1706)
• DHCP Client – Dynamic Host Configuration Protocol (RFC 2131)
• TCP – Transmission Control Protocol (RFC 93)
• UDP – User Datagram Protocol (RFC 768)
• RTP – Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP – Real Time Control Protocol (RFC 1889)
• DiffServ (RFC 2475), Type of Service (RFC 791, RFC 1349)
• SNTP – Simple Network Time Protocol (RFC 2030)
• SIPv2 – Session Initiation Protocol Version 2 (RFC 3261, 3262,3263, 3264)
• SIP in NAT networks (STUN)
• Autoprovisioning via DHCP Option 66 or via configured server
• Backup SIP server configurable
• Firmware update via web interface
• Integrated POE switch with support for tagged VLANs
Voice codecs
• G.711 (A-law, µ-law)
• G726 (32 kbps)
• G.721
• DTMF in-band and out -of-Band (RFC 2833), SIP info
• Full duplex, echo suppression (AEC)
• Speaker volume configurable in 10 levels
• Microphone sensitivity configurable in 10 levels
Electrical characteristics
• Power supply via Power over Ethernet (PoE) according to IEEE802.3af
• Max . Power consumption: 12 W
• SIP station: 5 W
• Device on PORT2: max. 7 W
• Max. switching capacity of the relays: 2 A / 30VDC, 0.5 A /40VAC
• Input voltage alarm input: 10 V to max. 15 V
• Operating temperature: -20° C to +50° C
21-1100-IP
module loudspeaker, size 3
• Loudspeaker size 3 (large)
• Incl. anti-twist protection for correct module installation
• Front panel: aluminum in V2A design
• Material thickness: 4 mm
• Dimensions (H x W): 90 x 90 mm
21-3112
Microphone module, 1 button
• Microphone with a call button and labeling field (middle)
• Incl. anti-twist protection for correct Module installation
• Front panel: aluminum in V2A design
• Material thickness: 4 mm
• Dimensions (H x W): 90 x 90 mm
21-2001
Module touch selection block
• Touch selection block with 16 buttons (unlit)
• Free dialing possible
• 99 speed dial destinations
• Code lock function (Door opener function)
• 1 additional direct call button
• Incl. anti-twist protection for correct module installation
• Front panel: aluminum in V2A design
• Material thickness: 4 mm
• Dimensions (H x W): 90 x 90 mm
20-4908
Additional counterplate, size 1
• Counterplate size 1 as a U-shape to add a module installation location to the electronics housing
• Material: stainless steel