Startech.com GLCSXMMDST, EAN: 0065030868587

Startech.com GLCSXMMDST SFP Transceiver 1000Base-SX MM

Computer Hardware > Server Accessories > Networking and Communications

Startech.com GLCSXMMDST SFP Transceiver 1000Base-SX MM

Lieske Part No. 967062
Mfg Part No GLCSXMMDST
EAN-Code 0065030868587
Manufacturer Startech.com
Here only 46,30 EUR
55,10 EUR incl. VAT

Further information for Startech.com GLCSXMMDST SFP Transceiver 1000Base-SX MM

Certificates
Compliance certificatesCE, RoHS
Features
Product colourSilver
Housing materialAluminium
Mean time between failures (MTBF)3381761 h
Hot-swapYes
Logistics data
Master (outer) case width342 mm
Master (outer) case length428 mm
Harmonized System (HS) code85369010
Master (outer) case height352 mm
Products per master (outer) case108 pc(s)
Country of originChina
Operational conditions
Operating temperature (T-T)0 - 70 °C
Storage temperature (T-T)-40 - 85 °C
Operating relative humidity (H-H)5 - 95%
Packaging content
Quantity per pack1 pc(s)
Packaging data
Package width92 mm
Package depth113 mm
Package height33 mm
Package weight46 g
Performance
SFP transceiver typeFiber optic
Maximum data transfer rate1250 Mbit/s
Interface typeSFP
Fiber optic connectorLC
SFP transceiver standardSX
Maximum transfer distance550 m
Wavelength850 nm
Networking standardsIEEE 802.3z
Duplex systemFull
Multi-mode fiber (MMF) supportedYes
Digital Diagnostics Monitoring (DDM)Yes
Power
Power consumption (typical)1 W
Weight & dimensions
Width13.7 mm
Depth56.6 mm
Height12.5 mm
Weight18 g
The StarTech.com SFP transceiver module with manufacturer number GLCSXMMDST is a compatible fiber optic transceiver module for Gigabit Ethernet networks, specifically designed for use in Cisco® switches and routers. It enables reliable data transmission over multimode fiber cables in the 1000BASE-SX standard and is designed for networks requiring a maximum transmission distance of up to 550 meters. The module is designed as a hot-swap module, meaning it can be replaced during operation without completely interrupting network operations. It supports Digital Diagnostic Monitoring (DDM), which transmits the transceiver's status to network management systems based on SNMP.

Applications

The module is primarily intended for use in Cisco network devices such as Firepower, ASR920, IE2000, IE4000, and ASR1000. It is used for replacing defective or damaged SFP modules and for extending networks in remote segments. Additionally, it is compatible with switch models from other manufacturers that support MSA-compliant SFP ports, including Ubiquiti, D-Link, Netgear, Supermicro, and TP-Link, provided they accept non-coded modules.

Features and Specifications in Detail

The module operates in full-duplex mode and provides a maximum data transfer rate of 1250 Mbit/s, complying with the 1000BASE-SX specification. Transmission occurs over multimode fiber with a wavelength of 850 nm, using an LC optical connector. Power supply is via the SFP port with an output voltage of 3.3 V DC, and power consumption is under 1 watt. The mean time between failures (MTBF) is 3,381,761 hours, indicating high reliability.

Technical Explanation

The SFP transceiver is a modular network interface inserted into an SFP port of a network device. It converts electrical signals into optical signals, enabling transmission over fiber optic cables. The use of multimode fiber with an 850 nm wavelength is typical for short to medium distances in local networks. The DDM function allows monitoring of parameters such as temperature, voltage, transmit power, and receive level, simplifying network administration.

Compatibility and Accessories

The module is 100% compatible with the Cisco GLC-SX-MMD standard and can be used in all Cisco devices that support an SFP port for 1000BASE-SX. It is also compatible with other MSA-compliant switches that accept non-coded modules. StarTech.com offers a wide range of SFP modules and SFP direct connection cables that can be used to extend and optimize networks.

Installation and Mounting

Installation is performed by inserting the module into the corresponding SFP port of the network device. Due to its hot-swap capability, this can be done during operation, with minimal network interruption. The physical dimensions of the module are 56.6 mm (depth) × 13.7 mm (width) × 12.5 mm (height), and it weighs 18 g. The housing is made of aluminum and is silver in color.

Operational Advantages

The module provides a reliable and high-performance connection for Gigabit Ethernet networks over multimode fiber. The hot-swap capability and DDM support enhance operational safety and simplify maintenance. The lifetime warranty and free technical support from StarTech.com provide additional operational security. The operating temperature ranges from 0 °C to 70 °C, and the storage temperature ranges from -40 °C to 85 °C, with relative humidity during operation allowed between 5 % and 95 %. Compliance with CE and RoHS ensures adherence to European safety and environmental standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/967062
qrcode für Startech.com GLCSXMMDST SFP Transceiver 1000Base-SX MM