| Design |
| Product colour | Black |
| Material | Plastic |
| Logistics data |
| Harmonized System (HS) code | 84733080 |
| Master (outer) case width | 366 mm |
| Master (outer) case length | 588 mm |
| Master (outer) case height | 218 mm |
| Products per master (outer) case | 100 pc(s) |
| Other features |
| Operating relative humidity (H-H) | 0 - 65% |
| Storage relative humidity (H-H) | -20 - 70% |
| Fan performance | 25.02 cfm |
| Dimensions (WxDxH) | 80 x 80 x 25 mm |
| Connector(s) | 1 - Molex Fan (4 pin; PWM) |
| Rotational speed | 2500 RPM |
| Performance |
| Suitable location | Computer case |
| Type | Fan |
| Fan diameter | 8 cm |
| Noise level (high speed) | 28 dB |
| Mean time between failures (MTBF) | 40000 h |
| Operating temperature (T-T) | -10 - 70 °C |
| Power |
| Voltage | 12 V |
| Rated current | 0.16 A |
| Weight & dimensions |
| Weight | 86 g |
| Package width | 396 mm |
| Package depth | 143 mm |
| Package height | 34 mm |
| Package weight | 111 g |
The FAN8025PWM from Startech.com is an 80 mm computer case fan with Pulse Width Modulation (PWM), designed for cooling computer cases and other enclosed electronic enclosures. It ensures efficient air circulation to regulate the operating temperature of internal components, thereby supporting system stability and hardware lifespan. The fan features a 4-pin Molex connector, which connects to the PWM pins on the motherboard to dynamically adjust fan speed according to the system's current load. At low system load, the fan speed reduces, lowering power consumption and noise levels, while at high load, maximum cooling performance is delivered.
Applications
The fan is suitable for use in standard PC cases where targeted airflow is required, for example, for cooling the motherboard, processor, or graphics card. It can be used to replace a defective or noisy fan, or installed as an additional fan to improve air circulation within the case. The application is intended for indoor environments, with an operating temperature range of -10 °C to 70 °C and a relative humidity of 0 to 65 % during operation.
Features and Equipment in Detail
The FAN8025PWM features a
self-lubricating bearing (Ever Lubricate Bearing), ensuring long service life and low noise levels. The fan speed varies between 800 and 2500 RPM, with a maximum speed of 2500 RPM. The airflow rate ranges from 9.74 to 25.02 CFM, with 25.02 CFM achieved at maximum speed. The noise level is up to 28 dBA, ensuring quiet operation. Power supply is via 12 V DC with a nominal current of 160 mA.
Technology Explained Simply
Pulse Width Modulation (PWM) enables precise control of fan speed via the motherboard. The motherboard sends a PWM signal that adjusts the fan speed according to the required cooling performance. This results in more efficient cooling, as the fan does not run at full capacity continuously. The
MTBF (Mean Time Between Failures) is 40,000 hours, indicating high reliability. The housing is made of
plastic and is finished in
black. Dimensions are 80 mm (width) × 80 mm (depth) × 25 mm (height).
Compatibility and Accessories
The fan is equipped with a
4-pin Molex connector (PWM), which connects to the corresponding pins on the motherboard. The package includes a
PWM Y-split cable, allowing multiple fans to be connected to a single connector. The cable has a length of 295 mm. Compatibility is ensured if the system has a 4-pin PWM fan connector.
Installation and Mounting
Installation involves securing the fan at an appropriate location within the computer case, such as the front, rear, or side panel, depending on the airflow concept. The cable is connected to the PWM connector on the motherboard. Power supply is provided by the power supply unit, with the PWM signal controlled by the motherboard.
Operational Advantages
Using the FAN8025PWM provides improved cooling performance while reducing power consumption and operating noise. Dynamic speed control ensures the fan delivers only the required amount of performance. The long service life, thanks to the self-lubricating bearing, reduces maintenance requirements. Compatibility with standard PWM connectors makes the fan universally usable in many PC systems.
The package includes an 80 mm case fan and a 22 cm PWM Y-split cable. The warranty period is 2 years.